LG LRMVC2306S Owners Manual - Page 15

Removing/Assembling, Doors and Drawers

Page 15 highlights

fasteners and tightening the set screws b with a 1/8 in. Allen wrench. INSTALLATION 15 Removing the Left Refrigerator Door 1 The water supply is connected to the upper right part of the rear surface of the refrigerator. Remove the clip in the joint area. Hold the water supply connection and gently push the collet a to detach the water supply line as shown. ENGLISH Removing/Assembling Doors and Drawers If the entrance door is too narrow for the refrigerator to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway. WARNING • Use two or more people to remove and install the refrigerator doors and freezer drawer. • Disconnect the electrical supply to the refrigerator before installing. • Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. • Be careful when handling the hinge and hinge lever. • Remove food and bins before detaching the doors and drawer. • Do not hold the handle when removing or replacing the doors and drawer as the handle may come off. Tools Needed 3/32 in. Allen wrench 1/8 in. Allen wrench 1/4 in. Allen wrench Removing the Hinge Cover Remove the screws from the hinge cover at the top of the refrigerator. Lift the hook (not visible), located at the bottom of the front side of the cover with a flat-head screwdriver. NOTE • Disassembling/Assembling the Water Lines b Collet c Tube d Insert line e Clip 2 Pull out the water supply lines f. Disconnect all the wire harnesses g . Unscrew the ground wire h. 3 Rotate the hinge lever i counterclockwise. Lift the top hinge j free of the hinge lever latch k. CAUTION • When lifting the hinge free of the latch, be careful that the door does not fall forward.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

15
INSTALLATION
ENGLISH
fasteners and tightening the set screws
b
with a 1/8 in. Allen wrench.
Removing/Assembling
Doors and Drawers
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
WARNING
Use two or more people to remove and install
the refrigerator doors and freezer drawer.
Disconnect the electrical supply to the
refrigerator before installing.
Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
Be careful when handling the hinge and hinge
lever.
Remove food and bins before detaching the
doors and drawer.
Do not hold the handle when removing or
replacing the doors and drawer as the handle
may come off.
Tools Needed
3/32 in. Allen wrench
1/8 in. Allen wrench
1/4 in. Allen wrench
Removing the Hinge Cover
Remove the screws from the hinge cover at the top
of the refrigerator. Lift the hook (not visible),
located at the bottom of the front side of the cover
with a flat-head screwdriver.
Removing the Left Refrigerator
Door
1
The water supply is connected to the upper
right part of the rear surface of the
refrigerator. Remove the clip in the joint area.
Hold the water supply connection and gently
push the collet
a
to detach the water supply
line as shown.
NOTE
Disassembling/Assembling the Water Lines
b
Collet
c
Tube
d
Insert line
e
Clip
2
Pull out the water supply lines
f
. Disconnect
all the wire harnesses
g
. Unscrew the
ground wire
h
.
3
Rotate the hinge lever
i
counterclockwise.
Lift the top hinge
j
free of the hinge lever
latch
k
.
CAUTION
When lifting the hinge free of the latch, be
careful that the door does not fall forward.