LG LRSC26911TT User Guide - Page 12

Height Adjustment - refrigerator doors

Page 12 highlights

Installation If the freezer compartment door is lower than the refrigerator compartment door Height Adjustment Level the door by inserting flat ( - type) driver into the groove of the left height adjusting screw and rotating it clockwise . If the freezer compartment door is higher than the refrigerator compartment door Level the door by inserting flat ( - type) driver into the groove of the right height adjusting screw and rotating it clockwise . After leveling the The refrigerator doors will close smoothly by adjusting the height adjusting screw. If door height the doors do not close correctly, performance may be affected. Next 1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly. 2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their proper places. They are packed together to prevent possible damage during shipping. 3. Connect the power supply cord (or plug) to the outlet. Use this appliance on a single-outlet circuit. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

12
Height Adjustment
Level the door by inserting flat (
-
type) driver into the groove of the left height adjusting
screw and rotating it clockwise
±
.
Level the door by inserting flat (
-
type) driver into the groove of the right height
adjusting screw and rotating it clockwise
±
.
The refrigerator doors will close smoothly by adjusting the height adjusting screw. If
the doors do not close correctly, performance may be affected.
If the freezer
compartment door
is lower than the
refrigerator
compartment door
If the freezer
compartment door
is higher than the
refrigerator
compartment door
After leveling the
door height
Installation
±
±
Next
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Use this appliance on a
single-outlet circuit.