LG LSXS26386S Owners Manual - Page 37

Caution, Warning

Page 37 highlights

MAINTENANCE 37 ENGLISH Application Guidelines/Water Supply Parameters Service Flow 0.5 gpm (1.9 lpm) Water Supply Water Pressure Community or private well - Potable Water 20 -120 psi (138 - 827 kPa) Water Temperature 33°F - 100°F (0.6°C - 38°C Capacity 200 gallons (757 liters) It is essential that the manufacturer's recommended installation, maintenance and filter replacement requirements be carried out for the product to perform as advertised. NOTE  While the testing was performed under standard laboratory conditions, actual performance may vary. Replacement Cartridge: ADQ73613401 For estimated costs of replacement elements please call USA 1-800-243-0000 CANADA 1-888-LGCANADA (24 hours per day/7 days per week) or visit our website at www.lge.com 3M is a trademark of 3M Company. NSF is a trademark of NSF International. ©2009 3M Company. All rights reserved. WARNING To reduce the risk associated with choking:  Do not allow children under 3 years of age to have access to small parts during the installation of this product. To reduce the risk associated with the ingestion of contaminants:  Do not use with water that is ymicrobiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. EPA Establishment # 070595MEX-001 CAUTION To reduce the risk associated with property damage due to water leakage:  Read and follow Use Instructions before installation and use of this system.  Installation and use MUST comply with all state and local plumbing codes.  Do not install if water pressure exceeds 120 psi (827 kPa). If your water pressure exceeds 80 psi, you must install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure.  Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition.  Do not install on hot water supply lines. The maximum operating water temperature of this filter system is 100°F (37.8°C).  Protect filter from freezing. Drain filter when temperatures drop below 40°F (4.4°C).  The disposable filter cartridge MUST be replaced every 6 months, at the rated capacity or if a noticeable reduction in flow rate occurs.  Protect from freezing, remove filter cartridge when temperatures are expected to drop below 33° F.  Do not install systems in areas where ambient temperatures may go above 110° F (43.3° C). Where a backflow prevention device is installed on a water system, a device for controlling pressure due to thermal expansion must be installed.  Ensure all tubing and fittings are secure and free of leaks. Manufactured for LG Electronics by MCM Co., Ltd. 45-10, Nowon-Ri, Yiwol-Myun, JinchunKun, Chung-Buk, Korea.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

37
MAINTENANCE
ENGLISH
Application Guidelines/Water Supply Parameters
Application Guidelines/Water Supply Parameters
Service Flow
Service Flow
0.5 gpm (1.9 lpm)
0.5 gpm
(1.9 lpm)
Water Supply
Water Supply
Community or private well
Community or private well
- Potable Water
- Potable Water
Water Pressure
Water Pressure
20 -120 psi (138 - 827 kPa)
20 -120 psi (138 - 827 kPa)
Water Temperature
Water Temperature
33°F - 100°F (0.6°C - 38°C
33°F - 100°F (0.6°C - 38°C
Capacity
Capacity
200 gallons (757 liters)
200 gallons (757 liters)
It is essential that the manufacturer’s recom-
It is essential that the manufacturer’s recom-
mended installation, maintenance and filter
mended installation, maintenance and filter
replacement requirements be carried out for the
replacement requirements be carried out for the
product to perform as advertised.
product to perform as advertised.
Replacement Cartridge: ADQ73613401
Replacement Cartridge: ADQ73613401
For estimated costs of replacement elements
For estimated costs of replacement elements
please call USA 1-800-243-0000 CANADA
please call USA 1-800-243-0000 CANADA
1-888-LGCANADA (24 hours per day/7 days per
1-888-LGCANADA (24 hours per day/7 days per
week) or visit our website at www.lge.com
week) or visit our website at www.lge.com
3M is a trademark of 3M Company.
3M is a trademark of 3M Company.
NSF is a trademark of NSF International.
NSF is a trademark of NSF International.
©2009 3M Company. All rights reserved.
©2009 3M Company. All rights reserved.
CAUTION
To reduce the risk associated with property
damage due to water leakage:
Read and follow Use Instructions before
installation and use of this system.
Installation and use MUST comply with
all
state and local plumbing codes.
Do not install if water pressure exceeds
120 psi (827 kPa). If your water pres-
sure exceeds 80 psi, you must install
a pressure limiting valve. Contact a
plumbing professional if you are uncer-
tain how to check your water pressure.
Do not install where water hammer
conditions may occur. If water hammer
conditions exist you must install a water
hammer arrester. Contact a plumbing
professional if you are uncertain how to
check for this condition.
Do not install on hot water supply lines.
The maximum operating water tem-
perature of this filter system is 100°F
(37.8°C).
Protect filter from freezing. Drain filter
when temperatures drop below 40°F
(4.4°C).
The disposable filter cartridge MUST be
replaced every 6 months, at the rated
capacity or if a noticeable reduction in
flow rate occurs.
Protect from freezing, remove filter
car-
tridge when temperatures are expected
to drop below 33° F.
Do not install systems in areas where
ambient temperatures may go above
110° F (43.3° C). Where a backflow
prevention device is installed on a water
system, a device for controlling pres-
sure due to thermal expansion must be
installed.
Ensure all tubing and fittings are secure
and
free of leaks.
NOTE
While the testing was performed
under standard laboratory conditions,
actual performance may vary.
WARNING
To reduce the risk associated with chok-
ing:
Do not allow children under 3 years of
age to have access to small parts dur-
ing the installation of this product.
To reduce the risk associated with the
ingestion of contaminants:
Do not use with water that is
ymicrobi-
ologically unsafe or of unknown quality
without adequate disinfection before or
after the system. Systems certified for
cyst reduction may be used on disin-
fected water that may contain filterable
cysts. EPA Establishment # 070595-
MEX-001
Manufactured for LG
Manufactured for LG
Electronics by MCM Co.,
Electronics by MCM Co.,
Ltd. 45-10, Nowon-Ri, Yiwol-Myun, Jinchun-
Ltd. 45-10, Nowon-Ri, Yiwol-Myun, Jinchun-
Kun, Chung-Buk, Korea.
Kun, Chung-Buk, Korea.