LG LW1816HR Owners Manual - Page 16

Operating Instructions Operating Instructions Remote control The remote control and control panel will look like one of the following pictures. 23 REMOTE CONTROLLER 8 Temp 7 Fan Speed 1 Timer Mode 4 5 6 Auto Swing POWER Operation starts when this button is pressed and stops when you press the button again. OPERATION MODE SELECTOR Push the MODE button to rotate between Energy Saver / Cool / Fan / Heat. Energy Saver - The fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on and check the room air temperature if cooling is needed. Cool - Compressor runs and cools the room.Use the and FAN buttons to set the desired temperature and circulation fan speed. Fan - Fan circulates air but compressor does not run. Use the FAN button to set the desired fan speed. Heat - Heater runs and heats the room. ON/OFF TIMER Delay ON - when the air conditioner is off, it can be set to automatically turn on from 1 to 24 hours at its previous mode and fan settings. Delay OFF - when the air conditioner is on, it can be set to automatically turn off from 1 to 24 hours. FAN SPEED SELECTOR Use to set the fan speed to Low (F1), High (F2). TEMPERATURE CONTROL The thermostat monitors room temperature to maintain the desired temperature. The thermostat can be set between 60 F~86 F (16 C~30 C). 16 Room Air Conditioner