LG LW8019ER Owners Manual - Page 13

3 Loosely assemble each sill support. INSTALLATION 13 6 Attach the cabinet to the inside sill by driving 3 type B screws through the cabinet and into the sill. ENGLISH Sill Support Nut Bolt NOTE ● If the distance to the outer window sill is not that deep, you may not need the bolt and nut. 4 Use 2 type A screws to attach a sill support to the cabinet track holes on one side. Use the cabinet track holes that will place the sill support nearest to the outer edge of the sill. Repeat with the second sill support on the opposite side of the cabinet. Sash Track Front Angle NOTE ● Install the cabinet with a very slight downward tilt toward the outside. CAUTION ● Do not drill a hole in the bottom pan. The product is designed to operate with approximately ½" of water in the bottom pan. Screws (Type A) Outdoor 7 Pull each curtain panel out until it meets the window sash track. Pull the bottom window sash down behind the upper panel guide until they meet. Indoor 5 Install the cabinet with a slight tilt (about ½") downward on the outside. Use the bolt and nut to adjust the tilt of the cabinet. about ½" Cabinet Upper Panel Guide Sash Track Inside Window Sill Front Angle NOTE ● Do not pull the window sash down so tightly that the movement of the curtain panels is restricted. CAUTION ● Do not drill a hole in the bottom pan. The product is designed to operate with approximately ½" of water in the bottom pan. There is no need to add water if the pan is dry. 8 Use a screwdriver or power drill to attach the curtain panels to the window sashes by driving type C screws into the sashes through the cabinet holes shown in the