LG M3203C-BA User Guide

LG M3203C-BA Manual

Get LG M3203C-BA PDF manuals and user guides View all LG M3203C-BA manuals
Add to My Manuals
Save this manual to your list of manuals

LG M3203C-BA manual content summary:

  • LG M3203C-BA | User Guide - Page 1
    User's Guide M3203C M3703C Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Temporary noise is normal when
  • LG M3203C-BA | User Guide - Page 2
    of the box and assemble them as shown in the picture. Parts First, check if the following parts are all present. Screws (4) Stand (2) 2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. 3. Use the screws to
  • LG M3203C-BA | User Guide - Page 3
    - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in all model
  • LG M3203C-BA | User Guide - Page 4
    - Only M3203C To install Portrait "When installing Portrait, rotate it clockwise based on its front." 3
  • LG M3203C-BA | User Guide - Page 5
    Correction. Toggles through aspect ratio options. • Auto Button Automatic adjustment function (Operational for the analog signal only) There is not a function which is supported There is not a function which is supported • Exit Button • Volume Button Volume up and down • Check Button There is not
  • LG M3203C-BA | User Guide - Page 6
    Using the Remote Control • AV Button Toggles through video AV Component RGB PC HDMI/DVI • Input Select Button If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. Input AV Component RGB PC HDMI/DVI ▲▼ Inserting
  • LG M3203C-BA | User Guide - Page 7
    Parts * The product image in the user's guide could be different from the actual image. Rear View Power Connector : Connect the power cord RS-232C Serial Ports RGB PC, HDMI/DVI Ports -HDMI Supports AV Ports LAN Port Speaker Ports *LINE OUT A terminal used to connect to the speaker including a built-
  • LG M3203C-BA | User Guide - Page 8
    DVI signal input cable (not included). * When HDMI PC is used, a compatiblity problem might occur. A Rear side of the product. PC MAC PC/MAC Macintosh Adapter ) B (not included) Rear side of the product. PC * User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable
  • LG M3203C-BA | User Guide - Page 9
    Connecting to External Devices 1 Turn on power by pressing the power button on the product. 2 Turn on the PC. Power button Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT ▼▲ SET Or, press the INPUT button on the back of the product. INPUT
  • LG M3203C-BA | User Guide - Page 10
    LAN cable as shown in the below figure . A Connect PC to Monitor directly. LAN B Using a router(Switch) LAN Switch Product PC C program, please refer to eZ-Net Guide in the enclosed CD-ROM. Note • Using LAN establishes communication between your PC and the monitor and enables to use the OSD
  • LG M3203C-BA | User Guide - Page 11
    Connecting to External Devices Daisy Chain Monitors Use this function when displaying ANALOG RGB inputs of a PC to the other product. • To use different products connected to each other Connect one end
  • LG M3203C-BA | User Guide - Page 12
    Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchased separately and not available from LG. Refer to the instructions included with wall mount for more info. Kensington Security Slot The Set is equipped with
  • LG M3203C-BA | User Guide - Page 13
    Connecting to External Devices Video Input Connect the video cable as shown in the below figure and then connect the power cord (See page 7). A When connecting with a BNC cable. • C onnect the input terminal with a proper color match. B When connecting with a S-Video cable. • Connect to the S-
  • LG M3203C-BA | User Guide - Page 14
    Cable (not included) Audio Cable (not included) HDTV Receiver Note - Some devices may require HDCP in order to display HD signals. - Component doesn't support HDCP. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT ▼▲ SET Or, press the INPUT
  • LG M3203C-BA | User Guide - Page 15
    Signal Cable (not included) RCA-PC Audio Cable (not included) HDMI Signal Cable (not included) VCR/DVD/Set-top Box Note : Dolby Digital is not supported. VCR/DVD/Set-top Box Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT ▼▲ SET Or
  • LG M3203C-BA | User Guide - Page 16
    Connecting to External Devices Watching AV Outputs - When using AV input, you can connect the AV Out to other monitors. Video/TV BNC Cable (not included) Audio Cable (not included) Product BNC Cable (not included) Audio Cable (not included) Video/TV Note • When multi-connecting
  • LG M3203C-BA | User Guide - Page 17
    User Menus Screen Adjustment options Power Button • Press this button to turn on the power. Press this to amber. MENU Button • Use this button to show/hide the OSD (On Screen Display) menu screen. OSD Select / Adjust Button • Use this button to select an icon or adjust the setting in the OSD
  • LG M3203C-BA | User Guide - Page 18
    User Menus Screen Adjustment options AUTO/SET Button [For PC Analog signal] Auto in progress For optimal display change resolution to 1360x768 [When XGA Mode is active and 1360 X768 is selected] Auto in progress INPUT Button INPUT ▼▲ AUTO/SET - Toggles between inputs AV Component
  • LG M3203C-BA | User Guide - Page 19
    User Menus OSD Menu Icon Function Description Picture Audio Time Option Information Adjusts screen brightness, contrast and color that you prefer. Adjusts the audio options. Adjusts the timer options. Adjusts the screen status according to the circumstances. Adjust Set ID and check Serial No.
  • LG M3203C-BA | User Guide - Page 20
    AUTO/SET button (AUTO button on a remote Control) in the PC analog signal. Then optimal screen settings will be selected that fit into the current mode. If adjustment is not satisfactory, you can adjust the screen manually. [When XGA Mode is active and 1360 X 768 is selected] Auto in progress 19
  • LG M3203C-BA | User Guide - Page 21
    ,2 : Select this option to use the user-defined settings. User2 Backlight 20 Contrast 90 Brightness 50 Color 50 Sharpness 50 Tint 50 Expert MENU Backlight : To control the brightness of the screen,adjust the brightness of LCD panel. Contrast : Adjust the difference between the light
  • LG M3203C-BA | User Guide - Page 22
    Color Temperature Advanced Aspect Ratio Picture Reset Screen Cool Medium Warm User MENU Color Settings • Cool : Slightly purplish white. • Medium : Slightly bluish white. • Warm : Slightly reddish white. • User : Select this option to use the user-defined settings. User Red 0 Green 0 Blue
  • LG M3203C-BA | User Guide - Page 23
    User Menus Adjusting Screen Color Advanced Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen To set MENU • Gamma : Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images.
  • LG M3203C-BA | User Guide - Page 24
    User Menus Adjusting Screen Color Aspect Ratio To select the image size of the screen. Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen 16:9 Original 4:3 14:9 Zoom1 Zoom2 MENU 16:9 Just Scan Original 4:3 1:1 14:9 Zoom1, 2 Widescreen mode. Allows you to
  • LG M3203C-BA | User Guide - Page 25
    settings. Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen To set Screen MENU Adjust the screen video. Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen To set Screen Auto Config. Manual Config. XGA Mode Reset To set MENU MENU
  • LG M3203C-BA | User Guide - Page 26
    type that you're currently watching. Audio Sound Mode Auto Volume Balance Speaker MENU Clear Voice Standard Music Cinema Sport Game User • Clear Voice : By differentiating the human sound range from others,it helps users listen to human voices better. • Standard : The most commanding and natural
  • LG M3203C-BA | User Guide - Page 27
    User Menus Adjusting the timer function Time Clock On/Off Timer Sleep Time Auto Sleep Power On Delay Power Saving _ _ : _ _ AM Clock MENU If the current time is incorrect, reset the clock manually monitors and turning the power on, the monitors are screen is turned on as it was turned off. 26
  • LG M3203C-BA | User Guide - Page 28
    User Menus Adjusting the timer function Time Clock On/Off Timer Sleep Time Auto Sleep Power On Delay Power Saving MENU To set Power Saving Level On Time Off Time Off Level 1 Level 2 Level 3 Power Saving MENU This screen brightness adjusting menu helps you save energy. • Level: Total 4 screen
  • LG M3203C-BA | User Guide - Page 29
    of time. Normal : Leave on normal if you don't foresee image burn in being a problem. White wash : White wash fills the screen with solid white. This helps removes permanent images burned into the screen. A permanent image may be impossible to clear entirely with white wash. Orbiter : May help
  • LG M3203C-BA | User Guide - Page 30
    User Menus Selecting the options Option Language Key Lock ISM Method Indicator To set DPM Select Tile Mode Indicator Network of the product to On or Off. If you set On, the lamp will automatically be turned on. DPM Select A user can choose to turn the power saving mode on / off. 29
  • LG M3203C-BA | User Guide - Page 31
    User Menus Selecting the options • To use this function - Must be displayed with H-Size V-Size H-Position V-Position Reset Tile ID Natural It is used to enlarge the screen and Off also used with several products to 0 view screen. 0 < > < > 1 Off • Tile Mode Tile mode and choose Tile alignment
  • LG M3203C-BA | User Guide - Page 32
    User Menus Selecting the options - Tile mode (product 1 ~ 9) : c(3) x r(3) column ID 1 ID 2 ID 4 ID 5 ID 7 ID 8 - Tile mode (product 1 ~ 2) : c(2) x r(1) column ID 1 ID 3 ID 6 row ID 9 ID 2 row -
  • LG M3203C-BA | User Guide - Page 33
    User Menus Selecting the options Tile mode Option Language Key Lock ISM Method of the bezel. Adjust the vertical size of the screen taking into account the size of the bezel. Moving the screen position horizontally. Moving the screen position vertically. Function to initialize and release Tile.
  • LG M3203C-BA | User Guide - Page 34
    User Menus Selecting the options Network Setup Sets up network information. Option Language Key Lock ISM Method Indicator DPM Select Tile Mode Network Setup Factory Reset MENU To set Network Setup Network Select DHCP Manual " is displayed at the bottom of the screen. While "Wait for IP Setup" is
  • LG M3203C-BA | User Guide - Page 35
    User Menus Adjust Set ID and check Serial No. and SW version. Information Set ID Serial No. SW Version IP Address Set ID Serial No. SW
  • LG M3203C-BA | User Guide - Page 36
    service. ● Power is on, power indicator is green but • Adjust brightness and contrast again. the screen range by referring to the Specifications in this manual. * Maximum resolution RGB : 1600 x the plug&play function is supported by referring to the video card user manual. 'Key Lock On' message
  • LG M3203C-BA | User Guide - Page 37
    "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set
  • LG M3203C-BA | User Guide - Page 38
    sound is set properly. ● Sound is too dull. ● Sound is too low. • Select the appropriate equalize sound. • Adjust the volume. Screen color is abnormal. ● S creen has poor color resolution (16 colors). • Set the number of colors to more than 24 bits (true color) Select Control Panel - Display
  • LG M3203C-BA | User Guide - Page 39
    The product specifications can change without prior notice for product improvement. M3203C LCD Panel Power Dimensions &Weight 31.51 inches (80.0 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 80.0 cm 0.51075 mm x 0.17025 mm x RGB(Pixel Pitch) Rated
  • LG M3203C-BA | User Guide - Page 40
    The product specifications can change without prior notice for product improvement. M3703C LCD Panel Power Dimensions &Weight 37 inches (94.0 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 94.0 cm 0.200 mm x 0.600 mm x RGB (Pixel Pitch) Rated
  • LG M3203C-BA | User Guide - Page 41
    specifications can change without prior notice for product improvement. Video Signal Input Connector Environmental Conditions Max. Resolution RGB : 1600 X 1200 @60Hz HDMI/DVI : 1920 X 1080 @60Hz - It may not be supported depending on the OS or video card type. Recommended Resolution
  • LG M3203C-BA | User Guide - Page 42
    Specifications PC Mode - Preset Mode Preset mode 1 640 x 350 2 720 x 400 *3 640 x 480 4 640 x 480 *5 800 x 600 6 800 x 600 7 832 x 624 *8 Green Amber - NOTE DTV/PC selection on RGB and HDMI/DVI inputs is available for PC resolutions : 640 X 480/60Hz, 1280 X 720/60Hz, 1920 X 1080/60Hz and DTV
  • LG M3203C-BA | User Guide - Page 43
    your PC. RS-232C Cable (not included) PC monitor 1 monitor 2 monitor 3 monitor 4 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) (Not Standard) PC RXD 2 TXD 3 GND 5 DTR 4 DSR 6 RTS 7 CTS 8 Monitor 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 (Female)
  • LG M3203C-BA | User Guide - Page 44
    01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11 29. Fan Fault check 30. Elapsed time return 31. Temperature value 32. Lamp fault check 33. Auto Volume 34. Speaker 35. Time 36. On Timer (On/Off Timer) On,
  • LG M3203C-BA | User Guide - Page 45
    RS-232C Controlling the Multiple Product 46. Power Saving 47. Power Indicator 48. H Position 49. V Position 50. H Size 51. V Size 52. Scheduling input select 53. Serial no. 54. S/W Version 55. Input Select COMMAND1 f f f f f f f f f x COMMAND2 l o q r s t u y z b DATA1 00H - 03H 00H - 01H 00H -
  • LG M3203C-BA | User Guide - Page 46
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1]: First command. (k, j, m, d, f,x) * [Command 2]: Second command.(a ~ u) * [Set ID]: Set up the Set ID number of product. range : 01H~63H. by setting '0',
  • LG M3203C-BA | User Guide - Page 47
    RS-232C Controlling the Multiple Product L Transmission / Receiving Protocol L 01. Power(Command : a) To control Power On/Off of the Set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show the status of Power
  • LG M3203C-BA | User Guide - Page 48
    (Main picture format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 1 : Normal Screen (4:3) 2 : Wide Screen (16 :9) 4 : Zoom1 (AV) 5 : Zoom2 (AV
  • LG M3203C-BA | User Guide - Page 49
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 05. Volume Mute(Command : e) To control On/Off of the Volume Mute. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) Acknowledgement [e][ ][Set ID][ ][OK][
  • LG M3203C-BA | User Guide - Page 50
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 07. Contrast(Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' as shown
  • LG M3203C-BA | User Guide - Page 51
    mapping' page A8. Acknowledgement [i][ ][Set ID][ ][OK][Data][x] Data Min : 00H ~ Max : 64H 10. Tint(Command : j) (Video Timing only) To adjust the screen tint. You can also adjust the tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red: 00H ~ Green: 64H (Hexadecimal code
  • LG M3203C-BA | User Guide - Page 52
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol L 11. Sharpness(Command : k) (Video Timing only) To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal
  • LG M3203C-BA | User Guide - Page 53
    ][x] Data Min : 00H ~ Max : 64H * Balance : L50 ~ R50 15. Color Temperature (Command : u) To adjust the screen color temperature. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0 : Medium 1 : Cool 2 : Warm 3 : User Acknowledgement [u][ ][Set ID][ ][OK][Data][x] Data 0 : Medium 1 : Cool 2 : Warm
  • LG M3203C-BA | User Guide - Page 54
    State : Used to Read the power off status when Stand-by mode. Transmission [k][z][ ][Set ID][ ][Data][Cr] monitor off by remote control 3 : Turn the monitor off by sleep time function 4 : Turn the monitor off by RS-232C function 8 : Turn the monitor off by off time function 9 : Turn the monitor
  • LG M3203C-BA | User Guide - Page 55
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 18. Auto Configure(Command: j u) To adjust picture position and minimize image shaking automatically. it works only in RGB(PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1 : To set Acknowledgement [u][ ][Set
  • LG M3203C-BA | User Guide - Page 56
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 20. Tile Mode(Command : d d) Change a Tile Mode. Transmission [d][d][][Set ID][][Data][x] Data 00 or 11 12 13 14 ... 55 Description Tile mode is off. 1 x 2 mode(column x row) 1 x 3 mode 1 x 4 mode ... 5 x 5 mode * The
  • LG M3203C-BA | User Guide - Page 57
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 21. Tile H Position(Command : d e) To set the Horizontal position. Transmission [d][e][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' page A8. Acknowledgement [e][][Set ID][][OK/NG][Data
  • LG M3203C-BA | User Guide - Page 58
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 23. Tile H Size(Command : d g) To set the Horizontal size. Transmission [d][g][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' page A8. Acknowledgement [g][][Set ID][][OK/NG][Data][x] 24.
  • LG M3203C-BA | User Guide - Page 59
    RS-232C Controlling the Multiple Product L Transmission / Receiving Protocol 25. Tile ID Set(Command : d i) To assign the Tile ID for Tiling function . Transmission [d][i][][Set ID][][Data][x] Data Min : 00H ~ Max : 19H (Hexadecimal code) Acknowledgement [i][][Set ID][][OK/NG][Data][x] L 26
  • LG M3203C-BA | User Guide - Page 60
    . Transmission [d][y][][Set ID][][Data][x] Data Structure Data(Hex) 00 01 02 03 04 05 06 Mode Clear Voice Standard Music Cinema sport Game User Acknowledgement [y][][Set ID][][OK/NG][Data][x] L 29. Fan Fault check (Command : d w ) To check the Fan fault of the TV. Transmission [d][w][][Set ID
  • LG M3203C-BA | User Guide - Page 61
    ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [n][][Set ID][][OK/NG][Data][x] * The data is 1 byte long in Hexadecimal. 32. Lamp fault Check(Command : d p) To check lamp fault. Transmission [d][p][][Set ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [p][][Set ID
  • LG M3203C-BA | User Guide - Page 62
    the volume level. Transmission [d][u][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [u][][Set ID][][OK/NG][Data][x] 34. Speaker (Command : d v) Turn the speaker on or off. Transmission [d][v][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [v][][Set ID][][OK/NG][Data][x] A20
  • LG M3203C-BA | User Guide - Page 63
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 35. Time (Command : f a) Set the current time. Transmission [f][a][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday [Data2] 0H~17H (Hours
  • LG M3203C-BA | User Guide - Page 64
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 36. On Timer (On/Off Timer) On, Off (Command : F b) Set days for On Timer. Transmission [f][b][][Set ID][][Data1][][Data2][Cr] [Data1] 0 (Write), FFH(Read) [Data2] 00H~FFH bit0 : Monday On Timer On(1), Off(0) bit1 :
  • LG M3203C-BA | User Guide - Page 65
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 38. On Timer (On/Off Timer) Time (Command : f d) Set On Timer. Transmission [f][d][][Set ID][][Data1][][Data2][Data3][Cr] [Data1] 0 : Monday 1: Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 :
  • LG M3203C-BA | User Guide - Page 66
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 39. Off Timer (On/Off Timer) Time (Command : f e) Set Off Timer. Transmission [f][e][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 :
  • LG M3203C-BA | User Guide - Page 67
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 40. Sleep Time (Command : f f) Set Sleep Time. Transmission [f][f][][Set ID][][Data][Cr] Data 0 : Off 1 : 10 2 : 20 3 : 30 4 : 60 5 : 90 6 : 120 7 : 180 8 : 240 (Orderly) Acknowledgement [f][][Set ID][][OK/NG][Data][x] 41.
  • LG M3203C-BA | User Guide - Page 68
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 42. Power On Delay (Command : f h) Set the schedule delay when the power is turned on (Unit: second). Transmission [f][h][][Set ID][][Data][Cr] Data : 00H ~ 64H (Data value) • Refer to 'Real data mapping' page A8.
  • LG M3203C-BA | User Guide - Page 69
    0 : Off 1: On Acknowledgement [j][][Set ID][][OK/NG][Data][x] 45. Reset (Command : f k) Execute the Picture, Screen and Factory Reset functions. Transmission [f][k][][Set ID][][Data][Cr] Data 0 : Picture Reset 1 : Screen Reset 2 : Factory Reset Acknowledgement [k][][Set ID][][OK/NG][Data][x] A27
  • LG M3203C-BA | User Guide - Page 70
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 46. Power saving(Command : f I) To set the Power saving mode. Transmission [f][I][][Set ID][][Data][Cr] Data 0 : Off 1: (static level 1) 2: (static level 2) 3: (static level 3) Acknowledgement [I][][Set ID][][OK/NG][
  • LG M3203C-BA | User Guide - Page 71
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 49. V Position (Command : f r) To set the Horizontal position Transmission [f][r][][Set ID][][Data][Cr] * The data range is from 00 to 64(in Hex) • Refer to 'Real data mapping' page A8. Acknowledgement [r][][Set ID][][
  • LG M3203C-BA | User Guide - Page 72
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 51. V Size (Command : f t) To set the Vertical size Transmission [f][t][][Set ID][][Data][Cr] * The data range is from 00 to 64(in Hex) • Refer to 'Real data mapping' page A8. Acknowledgement [t][][Set ID][][OK/NG][Data
  • LG M3203C-BA | User Guide - Page 73
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol L 52. Scheduling Input select (Command : f u) (Main Picture Input) To select input source for TV depending on day. Transmission [f][u][][Set ID][][Data1][][Data2][Cr] Data 1 Structure Min: 0~Max:7(0:Monday, 1: Tuesday, 2:
  • LG M3203C-BA | User Guide - Page 74
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 54. S/W Version (Command : f z) Check the software version. Transmission [f][z][][Set ID][][Data][Cr] Data FFH : Read Acknowledgement [z][][Set ID][][OK/NG][Data][x] 55. Input Select (Command : x b) To select input
  • LG M3203C-BA | User Guide - Page 75
    Product. Remote Control IR Code Output waveform single pulse, modulated with 37.917KHz signal at 455KHz Tc Carrier frequency FCAR = 1/Tc = fosc/12 T1 Duty ratio = T1/Tc = 1/3 Configuration of frame • 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4
  • LG M3203C-BA | User Guide - Page 76
    RS-232C IR Codes Code(Hex) 00 01 02 03 08 C4 C5 09 98 0B 0E 43 5B 6E 44 10 11 12 13 14 15 16 17 18 19 5A BF D5 C6 79 76 77 AF 99 L L Function L M VOL( ) VOL( ) POWER ON/OFF POWER ON POWER OFF MUTE AV INPUT SLEEP MENU EXIT PSM SET Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
M
ake sure to read the
Safety Precautions
before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
S
ee the label attached on the product and give the information to your dealer when you ask
for service.
M3203C
M3703C
User's Guide
Temporary noise is normal when powering ON or OFF this device.