LG NB3740 Owners Manual - Page 13
Connecting, Wireless Subwoofer Connection, Pairing wireless subwoofer
View all LG NB3740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting 13 Wireless Subwoofer Connection 3. If the LED of the wireless subwoofer already blinks in yellow-green continually, you can skip this step. Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. Pairing wireless subwoofer -- The LED of the wireless subwoofer lights up alternately in red and yellow-green. LED indicator of wireless subwoofer 4. Disconnect the power cord of the main unit and the wireless subwoofer. LED Color Status 5. Connect them again after the LED of the main 2 Connecting Yellow-green The connection is trying. (Blink) unit and the wireless subwoofer is fully turned off. The main unit and the wireless subwoofer will Yellow-green The connection is completed. be paired automatically when you turn on the Red Off (No display) The wireless subwoofer is in standby mode or the connection is failed. The power cord of wireless subwoofer is disconnected. main unit. -- When the connection is completed, you can see the yellow-green LED on the subwoofer. ,,Note yy It takes a few seconds (and may take longer) for the main unit and the subwoofer to Setting up the wireless subwoofer communicate with each other and make sounds. for the first time yy The closer the main unit and the subwoofer, 1. Connect the power cord of the Wireless subwoofer to the outlet. 2. Turn on the main unit : The main unit and wireless subwoofer will be automatically connected. the better sound quality. It is recommended to install the main unit and the subwoofer as close as possible (within 5 m) and avoid the cases below. -- There is a obstacle between the main unit and the subwoofer. Manually pairing wireless subwoofer When your connection is not completed, you can see the red LED or the blinking of yellow-green LED on the wireless subwoofer and the subwoofer does not make sound. To solve the problem, follow the below steps. -- There is a device using same frequency with this wireless connection such as a medical equipment, a microwave or a wireless LAN device. 1. Adjust volume level of the main unit to minimum. -- "VOL MIN" appears on the display window. 2. Press and hold MUTE(@) on the remote control for about 3 seconds. -- "WL RESET" appears on the display window briefly.