LG OLED55G1PUA Owners Manual - Page 14

For installation on concrete wall, For installation on wood stud

Get LG OLED55G1PUA PDF manuals and user guides View all LG OLED55G1PUA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

For installation on concrete wall 1 Drill holes in anchor locations with a drill bit of Ø 8 mm to a depth of 80 mm (3.15 inches) to 100 mm (3.94 inches). 2 Clean the drilled holes. 3 Insert the enclosed anchors for fixing the wall mount into the holes. (Use a hammer when inserting anchors.) 4 Push the wall mount support closely toward the wall to match the hole locations. 5 Tighten screws for fixing the wall mount to the holes. At this time, tighten the screws to a torque of between 45 kgf/cm (39.06 lbf/in) to 60 kgf/cm (52.08 lbf/in). Wall mounting anchor Wall mounting screw For installation on wood stud Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm (2.9 Inches). (Clean the drilled hole.) Without using the wall mounting anchor, fasten the wall mounting screw directly to the wood stud. Drywall 76 mm (2.9 inches) Wood stud 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
14
For installation on concrete wall
1
Drill holes in anchor locations with a drill bit of Ø 8 mm to a depth of 80 mm (3.15 inches)
to 100 mm (3.94 inches).
2
Clean the drilled holes.
3
Insert the enclosed anchors for fixing the wall mount into the holes. (Use a hammer when
inserting anchors.)
Wall mounting anchor
4
Push the wall mount support closely toward the wall to match the hole locations.
5
Tighten screws for fixing the wall mount to the holes. At this time, tighten the screws to a
torque of between 45 kgf/cm (39.06 lbf/in) to 60 kgf/cm (52.08 lbf/in).
Wall mounting screw
For installation on wood stud
Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm (2.9
Inches). (Clean the drilled hole.)
Without using the wall mounting anchor, fasten the wall mounting screw directly
to the wood stud.
Drywall
Wood stud
76 mm (2.9 inches)