LG RG-51C.AWYAHCI Owner's Manual - Page 16

Operating Instructions

Page 16 highlights

Operating Instructions Operating Instructions Location and Function of Controls CAUTION: If you turn off the air conditioner or switch from cooling to the fan, wait at least 3 minutes before setting to cooling again. POWER -Turns air conditioner off. FAN SPEED "Low" Low speed fan operation with cooling or not. FAN SPEED "High" Hi speed fan operation with cooling or not. This automatically controls the temperature of indoor air. Turn the knob so that arrow points to the cooler marks for more moderate cooling. Normal Fan 1. Turn the FAN speed mode switch to the "High" or the "Low" setting 2. Set the thermostat control to the temperature mark "Fan Only" Normal cooling 1. Turn the FAN speed mode switch to the "High" or the "Low" setting 2. Set the thermostat control to the desire temperature (the mid-point is a good starting position). If the room temperature is not satisfactory after a reasonable time, adjust the control to a warmer setting, as appropriate. Maximum cooling 1. Turn the FAN speed mode switch to the "High" setting 2. Set the thermostat control to the cooler temperature mark. Quieter operation 1. Turn the FAN speed mode switch to the "Low" setting 2. Set the thermostat control as needed. 16 Room Air Conditioner

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

1
6
Room Air Conditioner
CAUTION:
If you turn off the air conditioner or switch from cooling to
the fan, wait at least 3 minutes before setting to cooling again.
Operating Instructions
Operating Instructions
Location and Function of Controls
POWER
FAN SPEED "Low"
FAN SPEED "High"
-Turns air conditioner off.
Low speed fan operation with cooling or not.
Hi speed fan operation with cooling or not.
Normal Fan
1. Turn the FAN speed mode switch to the "H
igh
" or the "L
ow
" setting
2. Set the thermostat control to the temperature mark "F
a
n
O
nly"
Normal cooling
1. Turn the FAN speed mode switch to the "H
igh
" or the "L
ow
" setting
2. Set the thermostat control to the desire temperature (the mid-point is a good
starting position).
If the room temperature is not satisfactory after a reasonable time, adjust the
control to a warmer setting, as appropriate.
Maximum cooling
1. Turn the FAN speed mode switch to the "H
igh
" setting
2. Set the thermostat control to the cooler temperature mark.
Quieter operation
1. Turn the FAN speed mode switch to the "L
ow
" setting
2. Set the thermostat control as needed.
This automatically controls the temperature of indoor air. Turn the knob so that
arrow points to the cooler marks for more moderate cooling.