LG TD-C70212E Use and Care Guide - Page 11

Operating your dryer O perating your dryer Before first use of the dryer Before you use the dryer for the first time, there are some points that you have to check. After removing package, you will check the product has no problem and is properly installed. 1. Check the dryer is well balanced by using a leveller. In order to check this, you can see and adjust legs which are suppose to stay put. 2. Check some major parts such as water container, condenser, control panel and drum. 3. It is needed to operate 5 minutes drying to make sure drum inside gets warm. 4. In the early use of dryer, please leave it with door opened and power unplugged after operation to get rid of probable smell inside. 1. Turn power on. First, press the ''Power'' button. The indicator light above the button will become illuminated indicating that the machine is all set to run. Turn on. 2. Open the door. 3.Check the lint filter, water container and condenser. The lint filter near the door, should be emptied after or before drying operation. Open the door and check if lint filter is cleaned. If not, please clean it referring to page 15. Water container and condenser are also checked to be emptied and cleaned for better drying result. Open the Door. 4.Place laundry into the drum after sorting. The clothes should be sorted by its fabric type and dryness level and all the strings and belts of clothes should be well tied and fixed before being put into the drum. It is desired that you push laundry all the way back to keep it away from the door seal. If not, door seal and clothes may be damaged. Check the lint filter. 11