LG WKEX200HGA Owners Manual - Page 41
Care in Cold Climates
View all LG WKEX200HGA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
us_main.book.book Page 40 Tuesday, April 6, 2021 1:44 PM 40 MAINTENANCE NOTE • An OE message blinks on the display when the drain pump filter is clogged with dirt. Clean the drain pump filter. Care in Cold Climates Storing the Appliance If the washer will not be used for an extended period of time and is in an area that could be exposed to freezing temperatures, follow these steps to protect the washer from damage. NOTE • Make sure the drum is empty before following these steps. 1 Turn off the washer, and unplug the power cord. 2 Turn off the water faucets. 3 Disconnect the water inlet hoses. Drain any water from the hoses. 4 Plug the power cord into a properly grounded electrical outlet. 5 Add 1 gallon of nontoxic recreational vehicle (RV) antifreeze to the empty drum and close the door. • Never use automotive antifreeze. 6 Turn on the washer and press the Spin button. 7 Press the Start/Pause button to start the drain pump for 1 minute. • This will expel some of the antifreeze, leaving enough to protect the washer from damage. 8 Turn off the washer and unplug the power cord. 9 Dry the drum interior with a soft cloth, and close the door. 10 Store the washer in an upright position. 11 Remove the inserts from the dispenser. Drain any water in the compartments and let them dry. 12 To remove the antifreeze from the washer after storage, run the Speed Wash cycle using detergent. • Do not add laundry to this cycle. When the Water Inlet Hoses Are Frozen 1 Turn off the washer, and unplug the power cord. 2 Turn off the faucets connected to the water inlet hoses. 3 Pour hot water on the frozen faucets to thaw the water inlet hoses and remove the water inlet hoses. 4 Immerse the water inlet hoses in hot water to thaw them. 5 Reconnect the water inlet hoses to the water inlets of the washer and to the faucets. • See Connecting the Water Inlet Hoses for details. 6 Turn on the faucets. 7 Press the Power button to turn on the washer.