LG WM2032HS Owner's Manual - Page 5

Installation Instructions - code

Page 5 highlights

ENGLISH INSTALLATION INSTRUCTIONS Install or store unit where it will not be exposed to temperatures below freezing or exposed to outside weather conditions. Properly ground washer to conform with all governing codes and ordinances. To reduce the risk of electric shock, do not install the washer in humid spaces. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times. ■ Shipping bolts The appliance is fitted with shipping bolts to prevent internal damage during transport. ■ Removing shipping bolts 1. To prevent internal damage during transport, 4 locking bolts are installed. Before operating the washer, remove the bolts and braces. • If they are not removed, it may cause severe vibration, noise, and malfunction. 3. Take out the 4 bolts and braces by twisting the braces slightly. Keep the 4 bolts, braces and the wrench for future use. • Whenever the appliance is transported, the shipping bolts and braces must be replaced. 2. Unscrew the 4 bolts with the wrench supplied. cap 4. Close the holes with the caps supplied. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

ENGLISH
5
INSTALLATION INSTRUCTIONS
1.
To prevent internal damage during transport,
4
locking bolts are installed. Before operating
the washer, remove the bolts and braces.
• If they are not removed, it may cause severe
vibration, noise, and malfunction.
3.
Take out the 4 bolts and braces by twisting
the braces slightly. Keep the 4 bolts, braces
and the wrench for future use.
• Whenever the appliance is transported, the
shipping bolts and braces must be replaced.
2.
Unscrew the 4 bolts with the wrench supplied.
4.
Close the holes with the caps supplied.
The appliance is fitted with shipping bolts to prevent internal damage during transport.
Shipping bolts
Install or store unit where it will not be exposed to temperatures below freezing or
exposed to outside weather conditions.
Properly ground washer to conform with all governing codes and ordinances.
To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay
particular attention to keeping the appliance and its surroundings in clean condition at all times.
Removing shipping bolts
cap