LG ZW5010 Owners Manual - Page 15

Installation Pr Caution: During the following step, hold unit firmly until window sash is lowered to top channel behind side panel frames. Personal injury or property damage may result if unit falls from window. 1. Install the air conditioner in the window 1-1. Carefully lift the air conditioner and slide it into the open window. Make sure the bottom guide of the air conditioner drops into the notches of the L bracket. NO IC : When the air conditioner drops into the L bracket, the air conditioner will be centered in window opening. CENTER LINE 1-2. While steadying the air conditioner, carefully bring the window sash down behind the upper guide of the air conditioner. When the air conditioner is properly installed, it should tilt slightly down at the back. If it is set correctly in the window, it will hang lower in the back automatically. If it does not, there is a problem with the installation. WINDOW FRAME UPPER GUIDE SEAL BOTTOM GUIDE L BRACKET 2. Secure the guide panels Extend the guide panels (Type G) to fill the window opening using 2 screws (Type B), 2 screws (Type C) to secure them. ABOUT 1/4 3. Install the sash seal and sash lock 3-1. Cut the sash seal (Type F) to the window width. Stuff the sash seal between the glass and the window to prevent air and insects from getting into the room. 3-2. Fasten the L bracket using a screw (Type A). 3-3. Remove the screws that secure the cabinet and base pan in the right side. L BRACKET TYPE A TYPE B TYPE C SASH SEAL (TYPE F) 4. Window installation of room air conditioner is now completed. See ELECTRICAL DATE for attaching power cord to electrical outlet. Owner's Manual 15