Lenovo 2758MXU User Manual - Page 73
HDD Active Protection Test, ThinkPad Devices
View all Lenovo 2758MXU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Table 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 1804 Unauthorized WAN card is plugged in-Power off and remove the WAN card. 1. Remove the WAN card that you installed. 2. System board. 1820 More than one external fingerprint reader is attached. Power off and remove all but the reader that you set up within your main operating system. Remove all but the reader that you set up for the authentication. 1830 Invalid memory configuration-Power off and install a memory module to Slot-0 or the lower slot. Install DIMM in Slot-0, but not in Slot-1. Note: For the construction of the DIMM slot, see "1050 DIMM slot cover and DIMM" on page 94. 2000 Hard Drive Active Protection sensor diagnostics failed.Press to continue.Press to enter SETUP 1. Undock docking station or port replicator if it is attached to the ThinkPad Notebook. 2. Place the ThinkPad Notebook on a horizontal surface. Do not apply any physical shock to the computer. 3. Run Diagnostics --> ThinkPad Devices --> HDD Active Protection Test. 201x Inform the following information to the The solid state drive you have installed has customer: If the customer is using a non not passed qualification for use in this qualified SSD which is not supported by this computer. Using this drive may cause system, with the risk in mind, the customer compatibility issues and potential issues can still use it by pressing ESC. Location of with data integrity, including data loss. Press the SSD is designated as below: to continue. 2010: HDD0 (in HDD slot-0) 2011: HDD1 (in HDD slot-1) 2012: Ultrabay with HDD adapter 2100 Initialization error on HDD0 (Main hard disk drive) 1. Reseat the hard disk drive. 2. Main hard disk drive. 3. System board. 2102 1. Reseat the hard disk drive. Initialization error on HDD1 (Ultrabay hard 2. Ultrabay™ hard disk drive. disk drive) 3. System board. 2110 1. Reseat the hard disk drive. Read error on HDD0 (Main hard disk drive) 2. Main hard disk drive. 3. System board. 2112 Read error on HDD1 (Ultrabay hard disk drive) 1. Reseat the hard disk drive. 2. Ultrabay hard disk drive. 3. System board. Related service information 65