Lenovo 6483 Lenovo IdeaPad S9-S10 UserGuide V2.0 - Page 36
Set Supervisor Password, Enter, Enter Current Password, Password on boot, Enabled
UPC - 883609856632
View all Lenovo 6483 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 2. Using your computer Changing or removing the supervisor password To change the password, do the following: 1 Select Set Supervisor Password, and press the Enter key. The Set Supervisor Password window opens. 2 Select Enter Current Password and type in the correct password. Then press Enter key once to move to Enter New Password field, type a new supervisor password in. 3 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 4 Commit your password to memory, and press the Enter key. To remove password, do the following: 1 Select Set Supervisor Password, and press the Enter key. 2 Select Enter Current Password and type in the correct password, and press the Enter key thrice. Note: Make sure the Password on boot is set to Enabled if you need the password protection at power on. 28