Lenovo A600 Lenovo IdeaCentre A600 Quick Reference V1.2 - Page 2

Bluetooth configuration Install the batteries as indicated below. 1 Pull the lid of the battery compartment on the back of the remote control. 2 Insert the batteries and close the lid of the battery compartment. Make sure the position of the polarities of the batteries is identical to the image. Note: Use good batteries and place them correctly in order to avoid malfunction or possible damage of the remote control. 3 The remote control is now ready to be configured by executing the following steps below. 4 To open the Devices and Printers dialog box, go to Windows and click Start -> Control Panel -> Hardware and Sound. 5 Press Add a device and pop-up a dialog box. The procedure to establish connection as described in the steps below needs to be finished within 180 seconds. Failing to do so will require you to repeat the steps until the connection has been completed successfully. 6 Press Play and digit 1 at the same time for about 10 seconds. 7 When the Bluetooth indicator light blinks twice every second and at the same time the remote control makes a beep sound, it means that the remote control is waiting for Bluetooth connection and the steps to add Bluetooth devices to the OS can be started. 8 Select the Lenovo_RC icon from the Add a device dialog box and click Next. Select Enter the device's pairing code and enter the password 0000. Once the Bluetooth connection has been completed successfully, the Bluetooth indicator light will turn on and the remote control can now work properly. 9 Once the Bluetooth connection has been completed successfully, the Bluetooth LED indicator becomes solid and the remote control can be used. Do not press Play and digit 1 again after having completed successfully the Bluetooth connection. Doing so will restart the pairing process. Bluetooth audio configuration. 1 In the Add Wireless Device dialog box, right click on Lenovo_RC device and select Properties in the menu. 2 Check the Headset box under the Services tab in the Properties dialog box. Click OK. 3 Right-click on Lenovo_RC device and select Control in the menu. 4 Under the Device Operations tab, if the computer is not connected to your Bluetooth headset (Lenovo_RC), click on Connect to establish the Bluetooth connection. To start the games Press the Game button to switch to the OK CD game mode. When the M indicator light is on, it OK means that the CD game mode has been switched on. Insert the Game CD in the optical drive and follow the prompts to start the games. Use the remote control to install and play the games. For more information about the games, check out Access Help on the Game CD. Air mouse In addition to the functions of a normal remote control, the air mouse can also be used as a regular mouse. The air mouse buttons are: Left air mouse button, Air mouse On/Off button, Right air mouse button. When the air mouse On/Off button is on, it is ready for use. Power Record Rewind Replay Back Press the air mouse On/Off button to switch between the air mouse and the remote control. Left air mouse/Game A Volume up/Game X Volume down/Game throttle up * key Clear A B X Y GHI PQRS ABC DEF JKL MNO TUV WXYZ ＃ Headphone LED indicator of Bluetooth LED indicator of joystick game LED indicator of CD game Game switch Phone On/Off Stop Fast forward Play or pause Skip Windows Media Center Start More Direction OK Air mouse ON/OFF Right air mouse/Game B Channel Up/Game Y Mute Channel down/Game throttle down Guide Digit/Input sources # key Enter Teletex On/Off (Select models only) (Select models only ) Microphone Hold the air mouse horizontally. Do not use the air mouse in a slanted or vertical position. Doing so might result in the pointer moving into another direction other than the intended one. Turn on/off/switch to games Turn on/off the air mouse Turn on/off the telephone Turn on the Windows Media Center Notes: When the Games mode and Windows Media Center are both turned on at the same time, the direction and OK buttons only work for games and do not work for Windows Media Center. For joystick games, the Volume Up/Down buttons as well as the Channel Up/Down buttons function as Game X/Y and Game throttle up/down buttons. You cannot use them to adjust volume or to switch channels. Important information on how to use the remote control Remove all batteries when you do not use them for a long time to avoid possible leakage. Use reliable good quality alkaline battteries. You can use the remote control in the following directions according to your games: Too close to the computer. 0 -1 meter (0 - 3 feet) ? Suggested range: 1 - 3 meters (3 -10 feet) Too far from the computer. Over 3 meters (over 10 feet) 30 Note: Bluetooth LED solid: Indicates a normal Bluetooth connection to the computer. Otherwise, this indicates disconnection or that the remote control is in sleep mode. M LED solid: Indicates that the CD game is active and can be manipulated by the remote control. 3D LED solid: Indicates that the joystick game is active and can be manipulated by the remote control. Game switch button: Used to switch among the 3 different game modes - CD game, joystick game, or to turn off the game. Press the button once to switch to another mode. The remote control is the standard MCE remote control for the model configured with Windows MCE. The Telephone and Air mouse buttons need to be pressed for more than 1 second to turn these functions on. Additional software needs to be installed in order to use the telephone. Note: When using the remote control, make sure the front side faces up. When in air mouse and game mode, if the remote control does not move or no button is pressed during 10-20 seconds, the remote control switches to sleep mode. During sleep mode, the Bluetooth connection remains on and the Bluetooth LED will be solid. Move the remote control or press any button to switch back to its previous mode. When in telephone mode, the remote control will never switch tostandby or sleep mode. In any mode other than telephone mode, if there is no operation within 10 minutes after switching to standby mode, the remote control enters sleep mode. As a result, the Bluetooth connection between the computer and the remote control will disconnect and the Bluetooth LED light will turn off. Press any button to wake up the remote control. However, wait for a moment to restore the Bluetooth connection. No pairing is needed when it is woken up from standby mode or sleep mode. When the computer goes into standby mode (S3), sleep mode (S4) or is turned off (S5), the remote control will go into sleep mode, disconnecting the Bluetooth connection. After waking up or restarting the system, you may press any button on the remote control to renew the Bluetooth connection. Use the remote control normally to save battery power. When the remote control power indicator blinks every three seconds, this The optimum distance between the remote control and computer is 1 - 3 meters (3 -10 feet). The best angle to use the remote control is within 30°. Make sure there are no physical obstacles between the remote control and the computer that could block the Bluetooth connection. means that the battery power is low and the remote control will turn off automatically after 10 minutes. When the remote control power indicator blinks 3 times per second during 3 seconds and if in telephone mode there are 3 beeps during 3 seconds, this indicates that the remote control cannot be used. You need to replace the batteries to use it again. After replacement of batteries, the indicator light will stop blinking. In Windows MCE mode: MCE remote control works normally. Press the related button to turn on the air mouse, game or wireless telephone function. In Air Mouse mode: MCE remote control and air mouse work normally. Press the related button to turn on the game or wireless telephone function. In Telephone mode: MCE remote control and wireless telephone function work normally. Press the related button to turn on the game or air mouse function. In Game mode: The Game function works normally. Press the related button to turn on the air mouse, MCE remote control or wireless telephone function. CAUTION When using the remote control, make sure the remote control's wrist strap is adjusted tightly around your wrist to avoid hitting people or objects around you. CAUTION Be aware of the people and the objects around you when you use the remote control. CAUTION Do not swirl the remote control by the wrist strap to avoid hitting someone or damaging something. CAUTION Do not use the remote control when your hand or the remote is wet. You might receive an electrical shock and damage the remote control. CAUTION Do not throw the remote control at will to avoid hitting someone or damaging something. CAUTION Keep a safe distance from all the objects and people within your reach. Pay attention to the lighting devices over your head to avoid damaging the remote control.