Lenovo G460e Lenovo G460e/G560e User Guide V1.0 - Page 46
Total, Memory, during startup. The BIOS setup utility screen opens.
View all Lenovo G460e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Appendix A. CRU instructions Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must be installed in SLOT-0 ( a : lower slot), but not in SLOT-1 ( b : upper slot). b a To make sure that the DDR3 SDRAM is installed correctly, do as follows: 1 Turn the computer on. 2 Hold F2 during startup. The BIOS setup utility screen opens. The Total Memory item shows the total amount of memory installed in your computer. 42
42
Appendix A. CRU instructions
To make sure that the DDR3 SDRAM is installed correctly, do as follows:
1
Turn the computer on.
2
Hold
F2
during startup. The BIOS setup utility screen opens. The
Total
Memory
item shows the total amount of memory installed in your
computer.
Note:
If only one DDR3 SDRAM is used on the computer you are servicing, the card must be
installed in SLOT-0 (
: lower slot), but not in SLOT-1 (
: upper slot).
a
b
b
a