Lenovo G70-70 Laptop User Guide - Lenovo G70-70 - Page 39
Fn + F2, System Memory, Connect the AC power adapter and the cables to the computer.
View all Lenovo G70-70 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Appendix. CRU instructions 6 If two DDR3L SDRAMs are already installed in the memory slot, remove one of them to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save the old DDR3L SDRAM for future use. a a b 7 Align the notch of the DDR3L SDRAM with the protrusion of the socket and gently insert the DDR3L SDRAM into the socket at a 30-45° angle. 8 Push the DDR3L SDRAM inward toward the socket until the latches on both edges of the socket are pushed into the closed position. b a 9 After aligning the attachment clips with their matching gaps, reinstall the compartment cover. 0 Reinstall and tighten the screws. A Reinstall the battery. B Turn the computer over again. C Connect the AC power adapter and the cables to the computer. To make sure that the DDR3L SDRAM is installed correctly, do as follows: 1 Turn the computer on. 2 Hold Fn + F2 during startup. The BIOS setup utility screen opens. The System Memory item shows the total amount of memory installed in your computer. 35