Lenovo H405 Lenovo H4 Series Hardware Maintenance Manual V2.0 - Page 60
Replacing the mouse
View all Lenovo H405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Hardware Maintenance Manual Replacing the mouse Attention Do not remove the computer cover or attempt any repairs before reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at: http://consumersupport.lenovo.com To replace the mouse: 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. 2. Unplug all power cords from electrical outlets. 3. Locate the connector for the mouse. Refer to "Locating connectors on the front of the computer" and "Locating connectors on the rear of the computer". Note Your mouse may be connected to the standard mouse connector at the rear of the computer or to a USB connector at either the front or rear of the computer. 4. Disconnect the defective mouse cable from the computer. 5. Connect the new mouse cable to the connector. 6. Refer to the "Completing the installation." 58