Lenovo IdeaCentre K210 K210 Hardware Replacement Guide - Page 11

--- Parallel Connector: To connect devices requiring a parallel connection. X-1 -- On-board VGA Card Connector: To connect with the signal cable of a monitor. On computer models that have an external graphics card, on-board graphics card signals are shielded and there are no VGA signal outputs - some models are equipped with this connector. --- USB Connector: To connect USB devices. -- Ethernet Connector: To connect LAN or broadband network devices. X-2 -- External VGA Card Connector: To connect with the signal cable of a monitor. It connects with the data cable of the monitor. (Some models are equipped with this connector.) DVI -- External DVI Card Connector: To connect to the data cable of the DVI connector. (Some models are equipped with this connector) S-1 -- S Video Connector: To connect the data cable of the S video. (You cannot connect with the data cable of the S video provided with the computer.) Some models are equipped with this connector. --- Chassis Side Lock: After installing the side panel of the chassis, push the lock upward to lock the side panel in place. To remove the side panel, depress the lock first. --- Audio Line-in Connector: To connect audio input to the computer. - Audio Line-out Connector: To connect to the speakers or headphones. ---- Microphone Jack: To connect to audio input from a microphone. ---- Used to attach your computer to a telephone line for modem use. (some models equipped with this connector) --- Used to attach a telephone line to your computer for modem use. 8 Hardware Replacement Guide 31032753 IdeaCentre K_HRG_EN.indd 8 2007.12.10 3:53:14 PM