Lenovo IdeaPad S510p Touch Hardware Maintenance Manual - IdeaPad S410p, S410p - Page 69
Make sure that the metal connector is attached firmly.
View all Lenovo IdeaPad S510p Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Lenovo IdeaPad S410p/S410p Touch/S510p/S510p Touch Figure 15. Removal steps of non-touch LCD unit (S410p/S510p) (continued) Remove the screws 2. Step 2 2 Screw (quantity) M2 × 2.5 mm, flat-head, nylok-coated (4) (S410p) LCD Bracket to LCD Cover M2 × 3 mm, flat-head, nylok-coated (4) (S510p) LCD Bracket to LCD Cover Color Torque Black 1.85+/-0.15 kgf*cm Black 1.85+/-0.15 kgf*cm Lift the LCD panel slightly 3. Peel off the adhesive tape and detach the connector in the direction shown by arrow 4. Then remove the LCD panel. When installing: Make sure that the metal connector is attached firmly. 65
65
Lenovo IdeaPad S410p/S410p Touch/S510p/S510p Touch
Figure 15. Removal steps of non-touch LCD unit (S410p/S510p) (continued)
Remove the screws
2
.
²
²
²
²
Step
Screw (quantity)
Color
Torque
2
M2 × 2.5 mm, flat-head, nylok-coated (4) (S410p)
LCD Bracket to LCD Cover
Black
2
M2 × 3 mm, flat-head, nylok-coated (4) (S510p)
LCD Bracket to LCD Cover
Black
1.85+/-0.15 kgf*cm
Lift the LCD panel slightly
3
. Peel off the adhesive tape and detach the
connector in the direction shown by arrow
4
. Then remove the LCD panel.
³
´
When installing:
Make sure that the metal connector is attached firmly.
1.85+/-0.15 kgf*cm