Lenovo IdeaPad U530 Touch Hardware Maintenance Manual - IdeaPad U530 Touch - Page 48

USB board, Screw quantity, Color, Torque - back cover

Get Lenovo IdeaPad U530 Touch PDF manuals and user guides View all Lenovo IdeaPad U530 Touch manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Lenovo IdeaPad U530 Touch Hardware Maintenance Manual 1080 USB board For access, remove these FRUs in order: • "1010 Battery pack" on page 33 Figure 8. Removal steps of USB board Unplug the connector in the direction shown by arrow a and b, unplug the speaker connector in the direction shown by arrow c. Remove two screws in step d , and then remove the USB board in the direction shown by arrow e . 3 4 4 5 1 2 Step Screw (quantity) d M2.5 × 3.0 mm, flat‐head, nylok‐coated (2) Color Black Torque 2.5±0.2kgfcm When installing: When attaching the USB board to the base cover, adjust the placement of the USB as shown, and make sure that both of the USB jacks are attached to the holes on the base cover as shown. Improper placement of the jacks might cause a damage. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Lenovo IdeaPad U530 Touch Hardware Maintenance Manual
44
1080 USB board
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 33
Figure 8. Removal steps of USB board
Unplug the connector in the direction shown by arrow
and
, unplug the
speaker connector in the direction shown by arrow
. Remove two screws in
step
, and then remove the USB board in the direction shown by arrow
.
When installing:
When attaching the USB board to the base cover, adjust the
placement of the USB as shown, and make sure that both of the USB jacks are
attached to the holes on the base cover as shown. Improper placement of the
jacks might cause a damage.
Step
Screw (quantity)
Color
Torque
M2.5 × 3.0 mm, flat
‐
head, nylok
‐
coated (2)
Black
2.5±0.2kgfcm
a
b
c
d
e
4
4
5
1
2
3
d