Lenovo IdeaPad Y480 Lenovo Y480&Y580 Hardware Maintenance Manual V1.0 - Page 60
Removal steps of system board continued
View all Lenovo IdeaPad Y480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Lenovo Y480/Y580 Hardware Maintenance Manual Figure 11. Removal steps of system board (continued) Y580: Release the antenna cables from the cable guides in the direction shown by arrows a. Remove four screws b. b b b b a a Step b Screw (quantity) M2.5 × 5 mm, flat-head, nylok-coated (4) Color Black Torque 1.5 ~ 2.0 kgfcm When installing: • Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. • Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides. 56
Lenovo Y480/Y580 Hardware Maintenance Manual
56
Figure 11. Removal steps of system board (continued)
Y580:
Release the antenna cables from the cable guides in the direction shown by
arrows
. Remove four screws
.
When installing:
•
Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
•
Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
Step
Screw (quantity)
Color
Torque
M2.5 × 5 mm, flat-head, nylok-coated
(4)
Black
1.5 ~ 2.0 kgfcm
a
b
a
a
b
b
b
b
b