Lenovo K2450 Hardware Maintenance Manual - Lenovo K2450 Notebook - Page 65

Integrated camera

Page 65 highlights

Lenovo ZhaoYang K2450 1130 Integrated camera For access, remove these FRUs in order: • "1010 Keyboard" on page 36 • "1020 Battery pack" on page 38 • "1040 Hard disk drive" on page 42 • "1050 DIMM" on page 44 • "1060 PCI Express Mini Card for wireless LAN/WAN and SSD card" on page 45 • "1080 Fan assembly and Heat Sink assembly" on page 51 • "1070 System board" on page 47 • "1090 LCD unit" on page 53 • "1100 Speaker, base cover, finger printer board, power assembly and LED board" on page 55 • "1110 LCD front bezel" on page 58 • "1120 LCD panel, LCD cable and hinges" on page 59 Figure 13. Removal steps of integrated camera Note: The integrated camera is stuck on the top center of the LCD cover. Disconnect the connector a, remove the integrated camera from the LCD cover in the direction b. a b When installing: Stick the integrated camera to the top center of the LCD cover and ajust the placement of it to make sure the connector is attached firmly. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83

Lenovo ZhaoYang K2450
61
1130 Integrated camera
For access, remove these FRUs in order:
“1010 Keyboard” on page 36
“1020 Battery pack” on page 38
“1040 Hard disk drive” on page 42
“1050 DIMM” on page 44
“1060 PCI Express Mini Card for wireless LAN/WAN and SSD card” on
page 45
“1080 Fan assembly and Heat Sink assembly” on page 51
“1070 System board” on page 47
“1090 LCD unit” on page 53
“1100 Speaker, base cover, finger printer board, power assembly and LED
board” on page 55
“1110 LCD front bezel” on page 58
“1120 LCD panel, LCD cable and hinges” on page 59
Figure 13. Removal steps of integrated camera
Note:
The integrated camera is stuck on the top center of the LCD cover.
Disconnect the connector
, remove the integrated camera from the LCD cover
in the direction
.
When installing:
Stick the integrated camera to the top center of the LCD cover
and ajust the placement of it to make sure the connector is attached firmly.
a
b
b
a