Lenovo NetVista A20 Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, a - Page 48
IDE Data Port Post write, Ultra DMA Direct Memory Access
View all Lenovo NetVista A20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
USB Keyboard Support Select enabled to use a USB keyboard. The USB Controller must also be set to enabled. IDE Drives Setup PIO (Programmed Input/Output) IDE device driver controllers can support up to two separate drives. These drives have a master/slave relationship which is determined by the cabling configuration used to attach them to the controller. PIO means Programmed Input/Output. Rather than have the BIOS issue a series of commands to effect a transfer to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the complete task by themselves. This is simpler and more efficient. Your system supports five modes, numbered from 0 to 4, which primarily differ in timing. When Auto (default) is selected, the BIOS will select the best available mode. This is true for the next four setup items: 1. IDE Primary Master PIO 2. IDE Primary Slave PIO 3. IDE Secondary Master PIO 4. IDE Secondary Slave PIO Ultra DMA (Direct Memory Access) This setting allows you to speed up data transfer between the IDE devices and your system. Select the Auto option to enable it or select disabled to disable it. IDE Burst Mode Determines the acceleration of data transfer for IDE devices. IDE Data Port Post write Determines the data transfer in the manner of "post write" feature. IDE HDD Block Mode Determines the automatic detection of the optimal number of blocks. Video Setup Select this menu item to modify the video settings. System Shared Memory Size Determines whether 2MB, 4MB, 8MB, 16MB, 32MB, or 64MB of system memory is to be used by video. Init Display First Specify which video subsystem to initialize first. PS/2 Mouse Detect Function Determines whether the power-on self test will check to see if a mouse is attached to the mouse connector. 48