Lenovo ThinkCentre A58e (English) Rescue and Recovery 4.5 Deployment Guide - Page 47
Changing the video resolution, Startup applications
View all Lenovo ThinkCentre A58e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
IPConfig =9.44.72.36 StartNet=Yes SubnetMask=255.255.255.128 4. Get the \PREBOOT\SWWORK NETSTART.TBI file by using the RRUTIL process described in "Using RRUTIL.EXE" on page 26. 5. Change factory -minint to factory -winpe 6. Comment out the following lines: regsvr32 /s netcfgx.dll netcfg -v -winpe net start dhcp net start nla 7. Put the \SWWORK\ NETSTART.TBI and \MININT\SYSTEM32 winbom.ini files back by using the RRUTIL process described in "Using RRUTIL.EXE" on page 26. Note: The default environment supports only the DHCP environment. The following table provides the entry and description for IP configurations: Table 20. Static IP address entries Entry Gateway IPConfig StartNet SubnetMask Description Specifies the IP address of an IP router. Configuring a default gateway creates a default route in the IP routing table. Syntax: Gateway = xxx.xxx.xxx.xxx Specifies the IP address that Windows PE uses to connect to a network. Syntax:IPConfig = xxx.xxx.xxx.xxx Specifies whether to start networking services. Syntax:StartNet = Yes | No Specifies a 32-bit value that enables the recipient of IP packets to distinguish the network ID and host ID portions of the IP address. Syntax:SubnetMask = xxx.xxx.xxx.xxx Changing the video resolution You can change the video resolution by changing the default Predesktop Area resolution settings of 800 × 600 × 16-bit. To change the settings, complete the following procedures: 1. Get the \MININT\SYSTEM32\WINBOM.INI file by using the RRUTIL process described in "Using RRUTIL.EXE" on page 26. 2. Open the file for editing. 3. Add the following entries: [ComputerSettings] DisplayResolution=800x600x16 or 1024x768x16 When the Rescue and Recovery environment starts, you see an additional window during startup that is titled "Factory preinstallation". The colors are reduced from thousands to 256. 4. Put back the \MININT\SYSTEM32\WINBOM.INI file by using the RRUTIL process described in "Using RRUTIL.EXE" on page 26. Startup applications The Rescue and Recovery Windows PE environment has the ability to support a startup scripts, programs, or customized programs. These scripts or programs will be processed before the Rescue and Recovery Windows PE environment reaches the main PE interface page. Chapter 3. Configurations 41