Lenovo ThinkCentre M57p Hardware Maintenance Manual - Page 100
Replacing, power, supply
View all Lenovo ThinkCentre M57p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Replacing the power supply Attention Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. This procedure describes how to remove and replace the power supply. 1. Remove the cover. See "Removing the cover" on page 89. 2. Remove the drive bay assembly. See "Accessing system board components and drives" on page 90. 3. Disconnect all power supply cables from the system board. See the system board diagram for your machine type at "System board connectors" on page 88. 4. Remove the hard disk drive. See "Replacing the hard disk drive" on page 104. Note: Observe the power supply cable routing underneath the hard disk drive. 5. The system board must be moved out of the way to remove the power supply. Remove the screws that secure the system board to the chassis and slide the system board away from the power supply. Note: You do not have to remove the system board from the chassis to remove the power supply. 6. At the rear of the chassis, remove the three screws that secure the power supply. Also remove the screw that secures the power supply at the front. 94 Hardware Maintenance Manual