Lenovo ThinkPad 360 Hardware Maintenance Manual - Page 298

Turn the system board upside down. Remove the screws 4 and 5 . Models 370C, 755C and 755Cs have only the screw on the right side in step 5. Notes: 1. In step 1 , use 5.0 mm and 5.5 mm hex head screwdrivers. To remove the processor card, gently lift the area shown by 3 straight up. Do not pull the other areas. 2. In step 6 , pull both edges of the bracket at the same time. Do not pull the center of the bracket. Use the following table for reference when replacing parts. Step Location (Quantity) 1 Expansion bus, lower shield (2) 1 I/O connector, lower shield (6) 4 Processor card (1) 5 Processor card connector 750x - (2), 370C, 755C, 755Cs - (1) Note: Make sure you use the correct screw. Length Hex head Hex head 6 mm 4 mm 288 IBM Mobile Systems HMM