Lenovo ThinkPad 380D HMM ThinkPad 380XD,385XD (May 1998) - Page 109
removed in step, attach them to the shield
View all Lenovo ThinkPad 380D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
TFT LCD: This figure shows the TFT type 1 LCD. For the type 2, the same procedure applies. 1 2 3 : Hinges 4 5 : Latches 2 3 3 2 Step Size (Quantity) Torque 1 (a) M 2.5 x 6mm, nylon-coated (2) 3-4 kgcm (b) M 2.5 x 6mm, special-head (1) 3-3.5 kgcm 2 M 2.5 x 6mm, nylon-coated (2) 3-4 kgcm Note: Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screws are tightened firmly. When replacing: When replacing the hinge covers removed in step 5 , attach them to the shield sheet with double-sided adhesive tape as the old ones had been attached. IBM ThinkPad 380XD, 385XD (2635) 101
TFT LCD:
This figure shows the TFT type 1 LCD.
For
the type 2, the same procedure applies.
±1²±2²±3²
: Hinges
±4²±5²
: Latches
2
2
3
3
When replacing:
When replacing
the hinge covers
removed in step
±5²
, attach them to the shield
sheet with double-sided adhesive tape as the old
ones had been attached.
Step
Size (Quantity)
Torque
±1²
(a)
M 2.5 x 6mm, nylon-coated (2)
3-4 kgcm
(b)
M 2.5 x 6mm, special-head (1)
3-3.5 kgcm
±2²
M 2.5 x 6mm, nylon-coated (2)
3-4 kgcm
Note:
Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table if you have a
torque screwdriver.
Never use a screw that you removed.
Use a new one.
Make sure the screws are tightened
firmly
.
IBM ThinkPad 380XD, 385XD (2635)
101