Lenovo ThinkPad 600X TP 600E Setup Guide that was provided with the system tha - Page 2
Electrical Safety, Setting Up Your Computer - no turning on
View all Lenovo ThinkPad 600X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Electrical Safety DANGER Electrical current from power, telephone, and communication cable is hazardous. To avoid shock hazard, connect and disconnect cables as shown below when installing, moving, or opening the covers of the product or attached devices. The 3-pin power cord must be used with a proper outlet. To Connect Turn everything OFF. Attach all cables to devices. Attach the signal cables to receptacles. Setting Up Your Computer You are now ready to assemble and start your computer. 1 If you want to connect a printer to your computer, open the connector cover. Connect one end of the printer cable to the parallel connector and the other end to your printer. Then power on the printer. Attach the power cord to an outlet. Turn the device ON. To Disconnect Turn everything OFF. First, remove the power cord from the outlet. Remove signal cables Remove all cables from receptacles. from devices. 2 If you want to use the CD-ROM and the diskette drive at the same time, you can attach the diskette drive to the external-diskette-drive connector as follows: Insert the diskette drive in the diskette-drive enclosure and connect it firmly 1 . Connect the cable to the external-diskette-drive connector 2 . Note: In the U.K., by law: The telephone line cable must be connected after the power cord. The power cord must be disconnected after the telephone line cable. 2 22 11