Lenovo ThinkPad 770 Quick Reference and Service Information for TP 770E/ED - Page 1

Lenovo ThinkPad 770 Manual

Page 1 highlights

Parts Number: 05L2163 ThinkPad 770E/770ED Quick Reference and Service Information Location LCD indicator panel TrackPoint Your Name: Company Name: Model Number: Serial Number: Company or Reseller Service: IBM Service Web Site: IBM Service Number: The IBM Service Number for your country can be found in the International Hardware Service Information booklet shipped with your computer. Notes: Click buttons Bay eject levers LED Telephone jack PC card slots UltraBay II Replacing the UltraBay II Device You want to... You need to... swap the device in the UltraBay II release the bay eject levers; then a message appears. Make sure the LED stays on green and there is no beep; then swap the device. attach the diskette drive externally power off your computer; then attach the external diskette drive. Note: Some devices or configuration might not support Hot plug. If the LED is blinking orange, you cannot operate. Function Keys Fn+ Result F2 Displays the battery power status indicator or erases it when it is being displayed. (The Fuel program must first be activated.) F3 Places the computer in standby mode. F4 Places the computer in suspend mode. F7 Changes computer display output locations. F8 Changes computer LCD modes. F11 Changes the power modes during battery-power operation F12 Places the computer in hibernation mode. Copyright IBM Corp.1998

  • 1
  • 2

Parts Number: 05L2163
Your Name:
Company Name:
Model Number:
Serial Number:
Company or Reseller Service:
IBM Service Web Site:
IBM Service Number:
Location
Telephone
jack
PC card slots
UltraBay II
Bay eject levers
LED
Click buttons
TrackPoint
LCD indicator
panel
Replacing the UltraBay II
Device
Function Keys
You want to...
You need to...
ThinkPad 770E/770ED
Quick Reference and Service Information
swap the device in
the UltraBay II
release the bay eject levers; then a
message appears.
Make sure the
LED stays on green and there is no
beep; then swap the device.
attach the diskette
drive externally
power off your computer; then
attach the external diskette drive.
Note:
Some devices or configuration might not support Hot
plug.
If the LED is blinking orange, you cannot operate.
Fn
+
Result
F2
Displays the battery power status indicator or
erases it when it is being displayed.
(The Fuel
program must first be activated.)
F3
Places the computer in standby mode.
F4
Places the computer in suspend mode.
The IBM Service Number for your country can be found in the
International Hardware Service Information
booklet shipped with
your computer.
F7
Changes computer display output locations.
F8
Changes computer LCD modes.
F11
Changes the power modes during battery-power
operation
Notes:
F12
Places the computer in hibernation mode.
Copyright IBM Corp.1998