Lenovo ThinkPad 770 TP 770X Setup Guide that was provided with the system that - Page 2
Electrical Safety, Setting Up Your Computer
View all Lenovo ThinkPad 770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Electrical Safety DANGER Electrical current from power, telephone, and communication cable is hazardous. To avoid shock hazard, connect and disconnect cables as shown below when installing, moving, or opening the covers of the product or attached devices. The 3-pin power cord must be used with a proper outlet. To Connect Turn everything OFF. Attach all cables to devices. Attach the signal cables to receptacles. Setting Up Your Computer You are now ready to assemble and start your computer. 1 If you want to connect a printer to your computer, open the connector cover. Connect one end of the printer cable to the parallel connector and the other end to your printer. Then power on the printer. Attach the power cord to an outlet. Turn the device ON. To Disconnect Turn everything OFF. First, remove the power cord from the outlet. Remove signal cables Remove all cables from receptacles. from devices. 2 Connect the AC Adapter to the computer's power jack (at the rear of the computer) in the order shown. 1 33 Note: In the U.K., by law: 2 The telephone line cable must be connected after the power cord. The power cord must be disconnected after the telephone line cable. 2