Lenovo V370 Lenovo V370 User Guide V1.0 - Page 35
compartment cover., Tighten the screws.
View all Lenovo V370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Appendix A. CRU instructions 6 If two SO-DIMMs are already installed in the memory slot, remove one of them to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save the old SODIMM for future use. 1 1 2 7 Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed in the slot and does not move easily. 8 After aligning the attachment clips with their matching gaps, reinstall the compartment cover. 9 Tighten the screws. 0 Reinstall the battery. A Turn the computer over, and reconnect the AC adapter and the cables to the computer. Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must bel installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot). b a 31