Lenovo V580c Lenovo V580, V580c Hardware Maintenance Manual - Page 56

Hard disk drive assembly, Removal steps of memory modules, When installing, Attention

Get Lenovo V580c PDF manuals and user guides View all Lenovo V580c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Removal steps of memory modules Release the two latches on both edges of the socket at the same time in the direction shown by the arrows 1 , and then unplug the memory module in the direction shown by the arrow 2 . 1 1 2 When installing: Insert the notched end of the memory module into the socket. Press the memory module firmly, and pivot it until it snaps into place. Ensure that it is firmly installed in the slot and does not move easily. Note: If only one memory module is to be installed on the computer you are servicing, the memory module must be installed in SLOT-0 ( a lower slot), but not in SLOT-1 ( b upper slot). b a 1050 Hard disk drive assembly For access, remove these FRUs in order: • "1010 Battery pack" on page 46 • "1020 Bottom slot cover" on page 46 Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, have the user make a backup copy of all the information on it if possible. • Never remove the drive while the computer is operating or in suspend mode. 50 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
Removal steps of memory modules
Release the two latches on both edges of the socket at the same time in the direction shown by the arrows
1
, and then unplug the memory module in the direction shown by the arrow
2
.
1
1
2
When installing:
Insert the notched end of the memory module into the socket. Press the memory module
firmly, and pivot it until it snaps into place. Ensure that it is firmly installed in the slot and does not move easily.
Note:
If only one memory module is to be installed on the computer you are servicing, the memory module
must be installed in SLOT-0 (
a
lower slot), but not in SLOT-1 (
b
upper slot).
a
b
1050 Hard disk drive assembly
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 46
•
“1020 Bottom slot cover” on page 46
Attention:
•
Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
•
Before removing the drive, have the user make a backup copy of all the information on it if possible.
•
Never remove the drive while the computer is operating or in suspend mode.
50
Hardware Maintenance Manual