Lexmark 11F0001 Setup Guide - Page 50
ing the system board on If you have other options to install, continue
UPC - 734646167017
View all Lexmark 11F0001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Clip Pins 8 Make sure both metal clips on the connector are fastened, and the two pins on each end of the connector are pushed through the holes on the card. Clip 9 Repeat steps 4-8 to install the other memory card or cards. 10 If you have other options to install, continue with "Installing a hard disk" on page 45 or "Installing adapters" on page 48. Otherwise, go to "Reinstalling the system board" on page 52. 44 Install memory and network options
44
Install memory and network options
8
Make sure both metal clips on the connector are
fastened, and the two pins on each end of the con-
nector are pushed through the holes on the card.
9
Repeat steps 4–8 to install the other memory card
or cards.
10
If you have other options to install, continue with
“Installing a hard disk” on page 45 or “Installing
adapters” on page 48. Otherwise, go to “Reinstall-
ing the system board” on page 52.
Pins
Clip
Clip