Lexmark 12N0008 User's Guide - Page 84

27 Replacing the fuser Your printer monitors the life of your fuser. When the fuser reaches the end of its life, the printer displays 80 Fuser Exhausted. This message indicates it is time for you to replace the fuser. For best print quality, make sure you replace the fuser when the printer displays 80 Fuser Life Warning. Press Go to clear the message. The Supplies message appears on the second line of the display to remind you that supplies need attention. You can open the Supplies Menu to see the 80 Fuser Exhausted and 80 Fuser Life Warning messages. The printer continues to display the Supplies message until you replace the fuser. To replace the fuser, use the following steps or the instruction sheet supplied with the fuser. Preparing for maintenance 1 Turn the printer on. 2 Follow the instructions in the table for the message your printer is displaying. Primary message 80 Fuser Life Warning Secondary message Select = Replace Go = Continue 80 Fuser Exhausted Select = Replace 80 Belt/Fuser Life Warning Select = Replace Go = Continue 80 Belt/Fuser Exhausted Select = Replace What you should do Press Select if you want to replace the fuser now. Press Go if you want to wait to replace the fuser. Press Select to replace the fuser. Press Select if you want to replace the fuser now. Press Go if you want to wait to replace the fuser. Press Select to replace the fuser. The Preparing for Maintenance message appears while the printer moves parts into position. After the parts are in position, the message Printer Ready for Maintenance appears, followed by Power Off to Replace Items. 3 Turn the printer off. Removing the fuser 1 Complete the steps in Preparing for maintenance on page 82. 2 Make sure the printer is turned off. 82