Lexmark 20K1100 Quick Reference - Page 2
Loading a tray, Loading letterhead, Common printer messages, Canceling a print job, Printing a menu
UPC - 734646641005
View all Lexmark 20K1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Loading a tray Width guide Load lines Length guide Paper size indicators Load media into any of the standard or optional trays. All trays are loaded the same way. 1 Remove the tray. 2 If you are loading an optional legal tray, open the cover. 3 Squeeze the length guide tabs together as shown, and slide the guide to the correct position for the size media you are loading. 4 Squeeze the width guide tabs together as shown, and slide the guide to the correct position for the size media you are loading. 5 Place the media into the tray with the recommended print side faceup for one- sided printing and facedown for two-sided printing. Do not load media above the load line. 6 If you are loading an optional legal tray, close the cover. 7 Re-insert the tray. Loading letterhead Letterhead must be loaded differently, depending on what options you have installed. One-sided printing (any tray) Two-sided printing (any tray) Common printer messages Message Actions Change Tray x The printer is requesting a different size or type of media than what is loaded. • Remove the currently loaded media from the specified tray, and then load the requested media. • Press Select to clear the message and print on the media currently loaded in the tray. • Cancel the current job. Waiting The printer has received data to print, but is waiting for a command or additional data. • Press Go to print the contents of the buffer. • Cancel the current job. Not Ready The printer is not ready to process data. Press Go to ready the printer to receive jobs. Flushing Buffer The printer is discarding the current print job. • Wait for the message to clear. • Sometimes this message means the driver data did not match what the printer was expecting. If the situation recurs, try printing from another printer driver. Canceling a print job To cancel a print job after it has started printing: 1 Press Menu until you see Job Menu, and then press Select. 2 Press Menu until you see Cancel Job, and then press Select. Printing a menu settings page To verify Paper Size and Paper Type settings, and check installed options and memory, print a menu settings page: 1 Press Menu until you see Utilities Menu, and then press Select. 2 Press Menu until you see Print Menus, and then press Select. The menu settings page prints. Operator panel menus Supplies Menu Toner Waste Bottle Photodev Cart Fuser Supplies Life Replace Supplies Color Menu Print Mode Color Correction Toner Darkness Color Saver Color Balance Color Samples Manual Color Paper Menu Paper Source Paper Size Paper Type Custom Types Universal Setup Substitute Size Paper Weight Paper Loading Finishing Menu Duplex Duplex Bind Copies Blank Pages Collation Separator Sheets Separator Source Multipage Print Multipage Order Multipage View Multipage Border PCL Emul Menu Font Source Font Name Point Size Pitch Symbol Set Orientation Lines per Page A4 Width Tray Renumber Auto CR after LF Auto LF after CR Setup Menu Printer Language Power Saver Resource Save Download Target Print Timeout Wait Timeout Auto Continue Jam Recovery Page Protect Display Language Alarm Control Toner Alarm Job Accounting Job Menu Cancel Job Confidential Job Held Jobs Reset Printer Print Buffer Abort Restore Utilities Menu Print Menus Print Net Setup Print Net Setup Print Fonts Print Directory Factory Defaults Remove Held Jobs Format Flash Defragment Flash Format Disk Job Acct Stat Hex Trace Coverage Est. PostScript Menu Print PS Error Font Priority Image Smoothing PDF Menu Parallel Menu PCL SmartSwitch PS SmartSwitch NPA Mode Parallel Buffer Job Buffering Advanced Status Protocol Honor Init Parallel Mode 1 Parallel Mode 2 MAC Binary PS Serial Menu PCL SmartSwitch PS SmartSwitch NPA Mode Serial Buffer Job Buffering RS-232/ RS-422 RS-422 Polarity Serial Protocol Robust XON Baud Data Bits Parity Honor DSR Network Menu PCL SmartSwitch PS SmartSwitch NPA Mode Network Buffer Job Buffering MAC Binary PS Std Net Setup Network Setup Help Menu Print All Help Guide Printing Guide Supplies Guide Print Quality Color Quality Media Guide Connection Guide Moving Guide Print Defects Jam Clearance USB Menu PCL SmartSwitch PS SmartSwitch NPA Mode USB Buffer Job Buffering MAC Binary PS P/N 20K1046 E.C. 2K0125 © 2003 Lexmark International, Inc. All rights reserved. Printed in U.S.A. 8/03