Lexmark 4036-306 Setup Guide - Page 15
Installing the duplex unit, Remove the duplex unit from the carton.
View all Lexmark 4036-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4 Place the drawer on top of the previously installed drawer or caster base. 5 Insert two short stabilizer screws (2) into the pockets of the 250-sheet drawer. The screws go through the drawer and into the top of the screws of the previously installed drawer or into the caster frame assembly. 6 Tighten the screws securely. Installing the duplex unit 1 Remove the duplex unit from the carton. 2 Remove all packing material and tape. 3 Use a flat tip screwdriver to remove the rubber feet from the bottom of the duplex unit. Assemble paper handling options 11
11
Assemble paper handling options
4
Place the drawer on top of the previously installed drawer or
caster base.
5
Insert two short stabilizer screws (2) into the pockets of the
250-sheet drawer.
The screws go through the drawer and into the top of the
screws of the previously installed drawer or into the caster
frame assembly.
6
Tighten the screws securely.
Installing the
duplex unit
1
Remove the duplex unit from the carton.
2
Remove all packing material and tape.
3
Use a flat tip screwdriver to remove the rubber feet from the
bottom of the duplex unit.