Lexmark 5770 Photo Jetprinter User Guide - Page 66
Top and Bottom Margins, Left and Right Margins
View all Lexmark 5770 Photo Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Troubleshooting Problems General print quality problems Improperly formed or misaligned characters Poor print quality at left, right, or bottom edge of page Solutions Try one (or more) of the following suggestions to correct this problem: • A print cartridge may be out of ink or low on ink. If the Ink Low message has appeared on your screen, install a new print cartridge. See "Installing or replacing print cartridges" on page 22. To view the ink level, check the ink level graphic shown on the Cartridges Tab or the Status Tab of the Control Program. • Change the Print Quality setting to something other than Quick Print 600. • Clean the print cartridge nozzles. See "Cleaning the print nozzles" on page 29. • Make sure the print cartridges are installed correctly. See "Installing or replacing print cartridges" on page 22. • Make sure you are using the correct type of paper. • Adjust the Brightness and Contrast. Clean the print cartridge nozzles. See "Cleaning the print nozzles" on page 29. Like other printers, your printer cannot print in the extreme left, right, or bottom edges of a page. To avoid poor print quality at the edges of the page, we recommend using these minimum margin settings: Left and Right Margins Left and right margin settings must be at least 6.35 mm (0.25 in.) each for all paper sizes except A4. For A4 size paper, left and right margin settings must be at least 3.37 mm (0.133 in.) each. Top and Bottom Margins The top margin must be set to at least 1.7 mm (0.067 in.). The bottom margin setting for all paper sizes must be 12.7 mm (0.5 in.) for monochrome printing and 19.5 mm (0.75 in.) for color printing. 60 Troubleshooting