Lexmark 782dn IPDS Printer and Host Setup Guide - Page 10
Activation Timer, NOMAX, IPDS PRINTER, bold., Step 4
UPC - 734646028349
View all Lexmark 782dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
IPDS Printer and Host Setup Guide AS/400 and iSeries LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server Example CRTDEVPRT with parameters to change shown in bold. Library User defined driver program........... USRDRVPGM *NONE Library System driver program SYSDRVPGM Secure connection SECURECNN *NO Validation list VLDL *NONE Library Publishing information PUBLISHINF Support duplex *UNKNOWN Support color *UNKNOWN Pages per minute black *UNKNOWN Pages per minute color *UNKNOWN Location *BLANK Data streams supported *UNKNOWN + for more values Text 'Description TEXT > 'IPDS PRINTER' (Note: 'IPDS PRINTER' is user defined text.) Dependent location name DEPLOCNAME *NONE Additional Parameters Remote network identifier RMTNETID Workstation customizing object........ WSCST Library Authority AUT *NETATR *NONE *LIBCRTAUT Note 1: Setting the Activation Timer to *NOMAX allows multiple writers or multiple hosts to use the same printer. The writer does not time out while waiting on the printer to start a new job. Step 4 Configure the Printer's Print Server TCP/IP Settings To enable IPDS printing with a Standard Network port or a MarkNet internal LAN print server, several settings must be verified. You can verify these settings from the printer control panel as shown below. 1 From a Ready state press the MENU button (printers) or touch (Menus on MFPs). 2 Use the navigation buttons or icons to scroll to Network/Ports. 3 Select Network/Ports. TIp: To do this on printers, press the Select button ; on MFPs just touch Network/Ports. 4 Now you will see a list of menus. Select the TCP/IP menu. 5 Use the navigation buttons or icons to scroll through the options. Check each of the following settings and change them as needed to configure TCP/IP communication. 10