Lexmark 935dtn Moving the printer
Lexmark 935dtn - C Color Laser Printer Manual
 |
UPC - 734646023535
View all Lexmark 935dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark 935dtn manual content summary:
- Lexmark 935dtn | Moving the printer - Page 1
and then unplug the power cord from the wall outlet. • Disconnect all cords and cables from the printer before moving it. • Remove all printer options before moving the printer. Warning: Damage to the printer caused by improper moving is not covered by the printer warranty. Setting the printer up in - Lexmark 935dtn | Moving the printer - Page 2
Any cart used to move the options must have a surface able to support the dimensions of the options. • Keep the printer in an upright position. • Avoid severe jarring movements. Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for a relocation
-
1 -
2
 |
 |
Moving the printer
Before moving the printer
CAUTION:
The printer weighs 201 lb (91.2 kg); therefore, it requires at least four people or a properly rated
mechanical handling system to lift it safely. Use the handholds on the sides of the printer to lift it, and make sure
your fingers are not under the printer when you set it down. Disconnect all cords and cables from the printer before
moving it.
Follow these guidelines to avoid personal injury or printer damage:
•
Use at least four people or a properly rated mechanical handling system to lift the printer.
•
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
•
Disconnect all cords and cables from the printer before moving it.
•
Remove all printer options before moving the printer.
Warning:
Damage to the printer caused by improper moving is not covered by the printer warranty.
Setting the printer up in a new location
For a basic printer, or a printer with an optional finisher installed, allow the following
recommended
amount of space
around the printer:
Moving the printer
Page 1 of 2