Lexmark 935dtn Moving the printer - Page 1

Moving the printer Page 1 of 2 Moving the printer Before moving the printer CAUTION: The printer weighs 201 lb (91.2 kg); therefore, it requires at least four people or a properly rated mechanical handling system to lift it safely. Use the handholds on the sides of the printer to lift it, and make sure your fingers are not under the printer when you set it down. Disconnect all cords and cables from the printer before moving it. Follow these guidelines to avoid personal injury or printer damage: • Use at least four people or a properly rated mechanical handling system to lift the printer. • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet. • Disconnect all cords and cables from the printer before moving it. • Remove all printer options before moving the printer. Warning: Damage to the printer caused by improper moving is not covered by the printer warranty. Setting the printer up in a new location For a basic printer, or a printer with an optional finisher installed, allow the following recommended amount of space around the printer: