Lexmark C734n User's Guide - Page 188
Skewed print, Solid color s, PAPER, GUIDES, PHOTOCONDUCTOR, DEFECTIVE, INSTALLED, INCORRECTLY
View all Lexmark C734n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Replace the toner cartridge if the defects occur every: • 33.0 mm (1.30 in.) • 35.3 mm (1.39 in.) Replace the photoconductor if the defects occur every: • 28.3 mm (1.11 in.) • 72.4 mm (2.85 in.) Replace the fuser if the defects occur every: • 47.4 mm (1.87 in.) • 94.8 mm (3.73 in.) • 113.0 mm (4.45 in.) Skewed print These are possible solutions. Try one or more of the following: CHECK THE PAPER GUIDES Move the length and width guides in the tray to the correct positions for the paper size loaded. • Make sure the guides are not too far from the paper stack. • Make sure the guides are not pressing too lightly against the paper stack. CHECK THE PAPER Make sure you are using paper that meets the printer specifications. Solid color pages These are possible solutions. Try one or more of the following: THE PHOTOCONDUCTOR MAY BE DEFECTIVE OR INSTALLED INCORRECTLY Remove and then reinstall the photoconductor. If the problem continues, the photoconductor may need to be replaced. Troubleshooting 188