Lexmark C748 Print Defects Guide - Page 1

Print defects guide Page 1 of 6 Print defects guide Repeating defects measurements Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects on the print job indicates which particular part is causing the defect. Note: There are four additional color pages and a blank page that will print out with this Guide. Use these pages for assistance in determining which part is defective. Change the photoconductor unit for Change the toner cartridge for the Change the fuser if one of these repeating defects the color that shows this defect. color that shows this defect. appears on the printed page. 72.4 mm (2.85 inches) 28.3 mm (1.11 inches) 33.0 mm (1.30 inches) 35.3 mm (1.39 inches) 47.4 mm (1.87 inches) 94.8 mm (3.73 inches) 113 mm (4.45 inches)