Lexmark C782 IPDS Emulation User’s Guide - Page 62
Reference edge: *LEFT
View all Lexmark C782 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
5.2.1.3.2 Center Fold (IPDS Center Fold-in) Center Fold-in may be specified using various application programs using the Operation Type Center Fold-in (X'08' in the IPDS data stream). Center Fold-in folds the paper along the centerline of the paper with the printed side folded in. Center Fold-in is only supported on selected paper sizes. Refer to your printer or finisher documentation for the paper sizes supported. Center Fold-in is only supported on Letter and A4 paper when the paper is loaded for Short Edge Fed (SEF) printing. All jobs specifying Center Fold-in will be routed to the finisher physical bin 3. Center Fold-in has a higher priority than bin selection, offset, and hole punch. These functions will be ignored when specified with Center Fold-in. 5.2.1.3.3 Saddle Staple (IPDS Saddle stitch-in) Saddle staple may be specified using various application programs using the Operation Type Saddle stitch-in (X'12' in the IPDS data stream). Saddle stitch-in folds the paper inward (printed side in) along the centerline and places two staples in the centerline fold. Saddle stitch-in is only supported on selected paper sizes. Refer to your printer or finisher documentation for the paper sizes supported. Saddle stitch-in is only supported on Letter and A4 paper when the paper is loaded for Short Edge Fed (SEF) printing. All jobs specifying Saddle stitch-in will be routed to finisher physical bin 3. Saddle stitchin has a higher priority than bin selection, offset, and hole punch. These functions will be ignored when specified with Saddle stitch-in. Saddle stitch-in may be controlled by the following parameters in the Printer File Saddle stitch-in Reference edge LEFT or *DEVD Reference edge offset..... *DEVD Number of staples......... *DEVD, Integer (see Number of staples below) Staple offsets DEVD Reference edge: *LEFT or *DEVD - NACKs may be generated for other parameters. Reference edge offset: *DEVD - All other values ignored. Number of staples: *DEVD - Two staples Integer - All integer values result in two staples. Staple offsets: *DEVD - All other values ignored. 62