Lexmark C925 Forms and Bar Code Card Technical Reference Guide
Lexmark C925 Manual
View all Lexmark C925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark C925 manual content summary:
- Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 1
Forms and Bar Code Card 3.2 Technical Reference Manual May 2011 www.lexmark.com - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 2
in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Optra Forms - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 3
/or its subsidiaries Microsoft Corporation All other trademarks are the property of their respective owners. © 2011 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 4
compatibility intercept 8 Supported Lexmark PCL 5 and PostScript bar codes 8 Chapter 4: PCL 5 emulation: HP 11 One-dimensional bar codes 11 Defining characteristics 11 Command structure considerations 11 Transparent print data command 12 Returning to normal text printing - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 5
for MaxiCode data 27 Chapter 5: PCL 5 emulation: Lexmark 29 New PCL 5 commands to support bar codes 29 Bar code descriptor ESC&x#W[descriptor data 29 Transfer bar code data ESC&y#W[bar code data 29 Compatibility safeguard 29 Lexmark symbology assignments 31 One-dimensional bar codes 32 Post - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 6
printer objects 97 Loading forms to a flash drive 97 Data capture to a flash drive 97 Creating a PIN for formsets 97 Enhanced delimiter functionality 98 Adding cc and bcc to e-mail function 98 Print forms stored on a flash drive 100 RFID support 100 Printing all forms 100 Vertical text centering - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 7
101 Bubble font 102 Determining printable characters 103 Printing errors 103 Forms files on printer directory 104 Appendix A: Feature Summary 105 Appendix B: Supported bar codes 108 Appendix C: Forms Card fonts 133 Single-byte Forms Card fonts 133 Double-byte Forms Card fonts 148 Appendix - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 8
.2 offers the following new features: • DLE: - Enhanced DLE menus - On-board user flash • Forms Card: - Adding fonts to existing printer objects - Loading Forms from a flash drive - Data capture to a flash drive - PIN for Formsets - Using page delimiters and lines per page simultaneously - Defining - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 9
description The Forms and Bar Code Card lets supported printers print a wide variety of industry-standard bar codes. The Forms and Bar Code Card generates bar codes algorithmically in PCL 5 or PostScript emulations. With PCL 5 emulation, a printer with the Forms and Bar Code Card installed is - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 10
Lexmark advanced PCL 5 commands for bar codes Cursor positioning Cursor positioning is set as follows when printing on the bar code, and scaled based on the width and height of printed along with the symbol. If printed, any character size and font available may be selected, and the text may be printed - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 11
, compression is automatically performed before printing the bar code. Checksum calculation character(s) according to the symbology specifications. Fixed length data formats can 3.3a option. Supported Lexmark PCL 5 and PostScript bar codes The following is a list of supported one-dimensional bar - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 12
• EAN/JAN-8 • EAN/JAN-8 with 2-digit supplemental • EAN/JAN-8 with 5-digit supplemental • EAN/JAN-13 • EAN/JAN-13 with 2-digit supplemental • EAN/JAN-13 with 5-digit supplemental • EAN-128 • French Postal 3 of 9 A/R • German Postal 2 of 5 (Leitcode and Identicode) • HIBC • Interleaved 2 of 5 • - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 13
of bar code data. Compatibility safeguard These commands, if sent to an HP printer, are flushed and nothing prints. Future HP PCL 5 enhancement could utilize the two escape sequences that have been chosen, forcing future Lexmark PCL 5 emulations to honor the HP versions of these commands and to - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 14
value is one of those given, then special bar code generation firmware will process the font selection command. Otherwise, PCL 5 emulation proceeds (s#V Esc(s#B Esc(s#S Characteristic Determines the location of human-readable text printed with the bar code. Selects the font used for human-readable - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 15
access to characters with code values of less than 32 decimal. These characters are normally considered unprintable. Use the transparent print data command to print bar codes which contain characters of less than 32 decimal. Example: Esc(s4p2h36v24701T Esc&p8X20•08•98 No data is specified with - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 16
printed with the bar code. 0 = Use default value 1 = Do not print text 2 = Print text embedded 3 = Print text half embedded 4 = Print text under bar code 5 = Print OCR-B Example: Esc(s304h24620T Selects EAN/JAN-8 with automatically sized, CG Times Bold text. Since parameters v, p, b, and - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 17
to: p b1, s1 b2, s2 h Do not print text 0.01 inch 0.03 inch Not applicable because of their values default to: v 0.4 p Do not print text s1 0.01 inch s2 0.03 inch h Not ,24,32s8,16,24,32b24700T Selects Code 128 autoswitch with text printed under the bar code, space widths set to 8, 16, - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 18
parameter list Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") Selects the bar code symbology is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character 3 Checksum character is always printed if embedded text is specified. - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 19
Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") (continued) Selects the text font parameter is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character 3 Checksum character is always printed if embedded text is specified. 6 12 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 20
Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") (continued) Selects the font parameter is CBA = 000 (automatically sized Courier Bold). 2 Does not include checksum character 3 Checksum character is always printed if embedded text is specified. 8 16 24 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 21
" on page 29). Human-readable text is never printed with these bar codes. In relation to the fields of the Lexmark bar code descriptor for Australia 4-State Postal bar codes, the following correspondences exist when using this technique: Bar Width (in 1/100 mm units): Bar Pitch (in bars per inch - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 22
of the Lexmark bar units): Bar Pitch (in bars per inch): Tracker Height (in 1/100 mm units): Ascender, Descender Offset (in 1/100 mm units code is a series of diagonal or vertical by blank spaces equal in size to the line widths. The only end of the base of the last bar when printing is complete. • - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 23
Note: The third command in the sequence depends on whether you want to print slashes or vertical bars. Esc(10U Esc(s0p4.5h0s0b4099T Esc&k2H///////// ///////// omnidirectionally. Note: Forms and Bar Code Card does not support the RSS Stacked Omnidirectional bar code. One-dimensional bar codes 20 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 24
-14 Limited • 24815T specifies RSS-14 Expanded Optional Selects the height of the bars in 1/72" (same units as fonts). Note: Values lesser than the minimum uses the corresponding default value for the specific RSS bar code type. Optional Selects the width of the bars. One-dimensional bar codes 21 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 25
RSS-14 AIM specification values. • Each of the V parameter values is considered in the RSS-14 AIM specification as a multiple of "X", which is a "module width", assumed to Mail bar code Intelligent Mail bar code is used by the Postal Service to sort and track letters and flats. It combines data from - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 26
The HP BarDIMM version 5.0 supports the Intelligent Mail bar code. The version 5.0 BarDIMM command for Intelligent Mail has no PCL parameters. It is printed in one size. Field Name Esc (s#T Esc (s#p Type name HRT Location Range n/a 0 - Default (No Text) 1 - No Text 2 - Embedded 3 - Half Embedded - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 27
. Description Required 24840T Optional Selects bar height bar height to 1/72" (same units as fonts) Note: Values from 0 to 2 are the same as the Parameters V2 and V3 are derived from the ELMICRON specification. In the HP BarDIMM Pro specification, the Codablock V parameter #1 is the single line - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 28
, this parameter also determines the small module width. Note: Using a value of 0 is the same as using a value of 10 (default). Notes: • HP BarDIMM specification contains only the PCL "B" parameter by itself. • The Data Matrix symbol automatically increases in size two-dimensionally. • Up to 88 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 29
size. 2 Aspect ratio values are used if the #b parameter is not used to manually set rows and columns. 3 The default choice (0) sets the symbol to the necessary size when using the Transfer Bar Code Descriptor command to print PDF417 symbols. In relation to the fields of the Lexmark bar code - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 30
4 = Ultra High reliability/ECC level (H), 30% damage allowed. Optional Specifies module height (and width) in dots (1/600 inch). Minimum value is 1. Optional for printing MaxiCode symbols follows the same rules that exist for data sent using the Lexmark Transfer Bar Code Data command to print - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 31
In relation to the fields of the Lexmark bar code descriptor for MaxiCode, the following correspondences exist when using this technique: Mode: Specified in the data The Typeface (Esc (s#T) value for MaxiCode is 24800. Two-dimensional bar codes 28 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 32
Lexmark This section discusses the Lexmark-specific commands implemented in the Forms and Bar Code Card. New PCL 5 commands to support bar codes Support of new bar code functionality requires new Lexmark commands, if sent to an HP printer, are flushed and nothing prints. A future HP PCL 5 enhancement - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 33
the second bar width in bar dimension units (#b2 parameter) Specifies the second space width in bar dimension units (#s2 parameter) Specifies the third bar width in bar dimension units (#b3 parameter) Specifies the third space width in bar dimension units (#s3 parameter) PCL 5 emulation: Lexmark 30 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 34
Description Specifies the fourth bar width in bar dimension units (#b4 parameter) Specifies the fourth space width in bar dimension units (#s4 parameter) Lexmark symbology assignments This table describes both new and existing Lexmark symbology assignments: Bar code type 2-D bar code 2-D bar code - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 35
-dimensional bar codes Post 4-State bar code descriptors (Lexmark) Bar code descriptor for Australian Post 4-State bar Pitch 22-25 (dec) 16-19 (hex) 24 (dec) 18 (hex) Sets the number of bars that print per inch 4 Tracker Height 100-160 (dec) 64-A0 (hex) 130 (dec) 82 (hex) Sets the tracker - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 36
-24 (dec) 14-18 (hex) 22 (dec) 16 (hex) Sets the number of bars that print per inch 4 Tracker Height 102-152 (dec) 66-98 (hex) 127 (dec) 7F (hex) 15 Reserved - - - Note: All seven code formats are supported. The format is implied on the type of data received. Embedded spaces and commas are - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 37
symbology 2 Bar Code Size 80-115 (dec) 50-73 (hex) 100 (dec) 64 (hex) Sets overall bar code size This value called "a" is a unit-less value multiplying factor the bar width to 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar height to 1/100 mm Sets the upward - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 38
generated by the data characters. Invalid characters in the data are ignored, and do not produce any error message. FIM symbols are printed according to the USPS specification. Bar height is fixed at 5/8 inch, and bars and spaces have a fixed width of 1/32 inch. Cursor positioning is handled the - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 39
-18 19-20 21-22 23-24 25-31 Field name Symbology ID Text Location Text Typeface Text Style Bar Height Units Bar Height Bar/Space Width Units Bar Width #1 (Module Width) Space Width #1 Bar Width #2 Space Width #2 Bar Width #3 Space Width #3 Bar Width #4 Space Width #4 Reserved Range - This value is - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 40
anywhere in the data; they are ignored. Three "." characters are inserted automatically at the correct positions in the human-readable text printed with a Swiss Postal bar code symbol, separating the four components of the identification code. Invalid characters or lengths in the identification - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 41
Range - 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-4 (dec) 00-04 (hex) 00-04 (hex) 6-7 Bar Height - 8 Bar/Space Width 00-04 (hex) Units 9-10 Bar Width #1 - 11-12 Space Width #1 - 13-14 Bar Width #2 - 15-16 Space Width #2 - 17-18 Bar Width #3 - 19-20 Space Width #3 - 21-22 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 42
default values, then the Bar Height and Bar/Space Width parameters assume new dimensions, based on the new units. In other words, the parameters are in "units", and if the "units" measurements change, so does the physical printed bar code. If any of the parameters are set to zero, then the default - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 43
Range - 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-4 (dec) 00-04 (hex) 00-04 (hex) 6-7 Bar Height - 8 Bar/Space Width 00-04 (hex) Units 9-10 Bar Width #1 - 11-12 Space Width #1 - 13-14 Bar Width #2 - 15-16 Space Width #2 - 17-18 Bar Width #3 - 19-20 Space Width #3 - 21-22 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 44
for an ISSN symbol consists of an 8-digit ISSN, followed by a two-digit price code, optionally followed by a two- or five-digit add-on code. If dimensions, based on the new units. In other words, the parameters are in "units", and if the "units" measurements change, so does the physical printed bar - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 45
No HRT 2=Embedded 3=HalfEmbedded 4=Under 5=Above 0=Courier 1=SM Gothic 2=SM Unit 3=SM Unit Condensed 4=Roman 5=OCRB 0=Regular 1=Italic 2=Bold (default) 3=Bold Italic 0=Default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units Default value Description n/a Required • 112 (dec) or 00 70 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 46
-12 Space Width #1 (Code 128 space 1, or Code 39 Narrow) Type int int int int Range 150-600 (dec) 0=Default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units 5-27 (dec) 5-27 (dec) Default value Description 240 (dec) 00 F0 (hex) Optional Corresponds to HP #v parameter in the specified - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 47
HRT) 1=No HRT 4=Under 5=Above int 0=Courier 1=SM Gothic 2=SM Unit 3=SM Unit Condensed 4=Roman 5=OCRB int 0=Regular 1=Italic 2=Bold 3=Bold Italic int 0=default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units [int int] Minimum: 307 (dec) 01 33 (hex) Maximum: There - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 48
13-14 Bar Width #2 (Wide) Type Range Default value Description int 0=default 0 or 2 (dec) Optional (1/600" units) 00 or 02 (hex) Specifies units for bar and space 1=1/300" widths units 2=1/600" units 3=1/1200" units [int int] 12-24 (dec) 00 0C-00 18 (hex) 12 (dec) 00 0C (hex) Optional - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 49
(dec) or 18 (hex) result in a pitch of 24. Notes: • PLANET is called from PCL using the block-call method. • For more information on the specifications implemented on the PLANET code, see Appendix B and C of the USPS PLANET - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 50
of the ascender or descender is the sum of this field and the tracker height. Optional. This determines the location of human-readable text printed with the bar code. Note: Intelligent Mail uses only the values 1, 4, and 5. Other values not specified will be replaced with 1. These bytes are ignored - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 51
Lexmark) Bytes 0-1 2-3 4-5 MSB LSB Range Symbology Symbology n/a ID byte 1 ID byte 2 (00x) (03x) Default (if not specified) n/a Reserved X dimension byte 1 (in Units) Units X dimension byte 2 (in units) 0=Default 1=1/300" units 2=1/600" units 3=1/1200" units of the module (white or - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 52
and maximum values. Sets the Y dimension of the module (white or black rectangle) in one-hundredths of specified as 1890 (dec) or 07 62 (hex). The Units enumeration will be set to 02 or 00 (hex), and symbology. Since most descriptors have different sizes and information, all bar code descriptors - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 53
units used in specifying the X dimension (the smallest element width). Supported values are 01x for 300 dpi units, 02x for 600 dpi units, and 03x for 1200 dpi units disable truncation. Rows: (Default = 00x) This can be used to manually set the number of symbol rows. Using aspect ratio, both rows and - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 54
Note: When manually setting the number of symbol rows and columns, the value of rows and columns must not be more than 928. A symbol size of rows = be selected, because it is closest to 20 x 0.35, or 7. This example prints a PDF417 bar code with the following settings: • ECC Level 4 • X dimension - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 55
02x) These two bytes signify the symbology. Since most descriptors have different sizes and information, all bar code descriptors must reserve the first two bytes notes: Depending on the mode, the input data sent with the Transfer Bar Code Data command must follow these rules: • For all modes - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 56
code set A as defined in AIM spec). Codes longer than 6 characters will be The country code and class of service must each be 3 digits in will be sent with the transfer bar code data command: Mode multi-row symbology based on PDF417 and specific and limited set of symbol sizes is available, each size - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 57
any of the modes. The support of NULL (hex 00) characters is not supported at this time, due to possible string termination issues within the printer. The basic block of the MicroPDF417 is the black or white module or rectangle. The nominal dimensions of the module width are two times that of - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 58
and set to the minimum and maximum values. Sets the Y dimension of the module (white or black rectangle) in 100th of an inch. The default width of a value of 18.9, which is specified as 1890 (dec) or 07 62 (hex). The Units enumeration will be set to 02 or 00 (hex), and these two bytes will be 07 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 59
identification is readable by all scanning technologies, and so that 2D imagers can use the linear component as a finder pattern for the Reserved Regular UPC codes Reserved Reserved Note: The number system digit is usually printed to the left of the bar code. b Manufacturer Code: The manufacturer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 60
due to inconsistent scanning speed, print imperfections, or a host of other problems, it is useful to verify same as the value of the check digit based on the data that has been scanned, then Since the resulting UPC-E bar code is about half the size as an UPC-A bar code, UPC-E is generally used on - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 61
UPC-E uses the "left-hand odd" and "left-hand even" encoding character sets from the EAN-13 encoding standard. Check character 0 1 2 3 4 5 6 7 8 9 Number system 0 encoding EEEOOO EEOEOO EEOOEO EEOOOE EOEEOO EOOEEO EOOOEE EOEOEO EOEOOE EOOEOE Number system 1 encoding OOOEEE OOEOEE OOEEOE OOEEEO - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 62
encoded as right-hand character g Right-hand guard bars, or end sentinel, encoded as 101 4 EAN-13 (including +2 and +5 variants) EAN-13, based on the UPC-A standard, was implemented by the International Article Numbering Association (EAN) in Europe. The only difference between a UPC-A symbol and an - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 63
before dates, batch numbers, quantities, weights and many other attributes the user needs. Each AI tells the system what kind of data will follow scanned omnidirectionally by suitably programmed point-of-sale scanners. It can also be printed in multiple rows as a stacked symbol. RSS-14 Stacked is a - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 64
Composite bar code sequence: (s36b24810T01234567890123|Lexmark(s0p12h10vsb4099T • Beginning with a RSS-14 24810T sequence • Followed by RSS-14 data "01234567890123" • Followed by a "|" pipe character • Followed by the Composite data string: "Lexmark" • Followed by a complete 4099T sequence - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 65
PCL specifications for composite bar codes Field Name Type Range Default (if not specified) bar code may be varied in only two directions. • The module height of the linear component is varied using the V parameter. • The module width of the linear component is varied using the B parameter. - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 66
Unit Condensed 4=Roman 5=OCRB 0 (dec) or 00 (hex) Optional Corresponds to the HP #h parameter Note: When the value given is not within the defined range, the value will be set to default (Courier). The dimensions of the composite bar code may be varied in only two directions. • The module height - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 67
card UPC Half Scalable In option card UPC Half Narrow Scalable In option card UPC Half Thin Scalable In option card USPS POSTNET Bitmap In printer Note: To obtain the PCL 5 ESC sequences used to select these fonts, print the PCL 5 font list from the - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 68
of binary data. Not all systems are able to send binary data (non-printing characters) to a printer. The FREESCAPE emulation feature provides a way for these systems to redefine the escape character by substituting a user-selected alternative (alternate escape code or AEC). When the AEC is located - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 69
To set an AEC from the printer control panel: 1 From the Bar code menu, select Alt ESC Code. 2 Select On to enable the AEC. 3 From the Bar code menu, select ESC Character. 4 Select an AEC from the menu. You can disable the AEC by setting Alt ESC Code to Off. FREESCAPE emulation 66 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 70
PostScript emulation This section describes additional PostScript emulation operators that are supported when a Forms and Bar Code Card is installed. These operators enable printing of bar code symbologies with user specified parameters from within the PostScript data stream. This functionality is - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 71
centered on the bar code. • Text is automatically scaled based on the width and height of the bar code and printed with the symbol. If printed, any character size and font available may be selected, and the text may be printed symbology specifications. Fixed length data formats can be - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 72
operator). This is similar to the show operator. Example: (01234567890) > barcodeshow This operation prints a UPC-A symbol starting at the currentpoint with the data half-embedded using the OCR-B font. The default quiet zone of ¼ inch - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 73
fully embedded within the code using the Courier-Bold font. For the EAN-8 symbology, the /Special key does not apply and the checksum character always prints when embedded text is specified so /PrintCheckChar is irrelevant. PostScript emulation operator 70 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 74
on the symbology, see "Values for /Symbology key" on page 73. /QuietZone [int int] Optional In /Units; the default value is [150 150]. /Bars [int int int int] Optional In /Units; the default value is based on the symbology, see "Values for /Symbology key" on page 73. /Spaces [num num num num - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 75
default value is false. • If value is set to false, then the start/stop * characters with text does not print. • If value is set to true, then the start/stop * characters with text prints. For French1 and German postal, then the default value is true. • If value is set to false, then - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 76
key Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code Default for /FontName key is Courier-Bold. 2 Does not include checksum character 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 77
Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code Default value for /FontName key is Courier-Bold. 2 Does not include checksum character 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 ( - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 78
Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code value for /FontName key is Courier-Bold. 2 Does not include checksum character 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 79
/Embedded 2 /HalfEmbedded 3 /Under 4 /Above 5 Definition Use symbology-dependent default parameter. See "Values for /Symbology key" on page 73. Does not print text Prints embedded text Prints the text half embedded For ISBN and ISSN, this value is not allowed as the second array element - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 80
/FontName /CG-Times-BoldItalic /OCR-B Example: /FontName /Courier Font attribute for HRT bold italic only one style How to use the symbology ID for ISBN and ISSN ISBN and ISSN bar codes are normally 10 digits in length (see the PCL 5 section above for a complete description), but they have - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 81
[array of integers] - Sets the encoding table Optional Sets the quiet zone in /Units The value is 1/100 mm Singapore Post 4-State bar code Key /Symbology /Bars Range the bar width to 1/100 mm Sets the number of bars that print per inch Sets the tracker height to 1/100 mm Sets the ascender and - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 82
Key /QuietZone /Units Range [int int] - Default value 150 150 (dec) [array of integers] - Description Optional Sets the quiet zone in /Units. The value is 1/100 mm Post 4-State bar code descriptors 79 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 83
(dec) /Ascender, 160-216 (dec) Descender Offset /QuietZone /Units [int int] - Default value /RoyalMail 50 (dec) [integer] 1/100 mm Sets the number of bars that print per inch Sets the tracker height to 1/100 for this value changes based on the /Size setting. For example, if /Size is set to 100 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 84
/SyncBarHeight 102-152 (dec) /UpDnBarHeight 160-216 (dec) /QuietZone [int int] /Units - Default value /DutchPostal 50 (dec) [integer] 22 (dec) [integer] 127 (dec the bar width to 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar height in 1/100 mm Sets the - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 85
. Sets the space width The default value is 11/600 inch. Optional Sets the quiet zone in /Units Optional The value is 1/600 inch /BarHeight must be: • Greater than or equal to 20 mm for module widths less than or equal to 0.45 mm (0.0177 inches) • Greater than or equal to 23 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 86
/Under /Above /NoText Description Identifies the bar code symbology The value is fixed. Sets the bar width in /Units Sets the number of bars that print per inch Sets the tracker height in /Units The value is fixed. Sets the ascender and descender offset in 1/100 mm The total height of an ascender - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 87
128 Key /Symbology Type name /Units /Height name int /Bars [int /HIBC128PAS /HIBC128SLS /HIBC39PAS /HIBC39SLS Optional /Units is used in the calculations that follow. Sets the bar widths in /Units Note: Values beyond the defined Sets the space widths in /Units Note: Values beyond the defined - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 88
[150 150] (dec) [96 96] (hex) Description Optional Defines how the HRT is printed When the value given is not within the defined range: • The value is set to used to compute for the valid values of Bar/Space Widths 2, 3, and 4 based on the ratios given. When Bar/Space Width 1 is invalid, all Bar/ - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 89
x Bar Width 1. • Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Sets the space widths in /Units Notes: • The range of values for Space Width 2 is dependent on the value of Space Width 1, where Min=2.25 x Space Width 1 Max=3 x Space Width - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 90
(hex) Description Optional Defines if and where the HRT is to be printed Optional Defines how the HRT is to be printed When the value given is not within the defined range: • If : For more information on the specifications implemented on the PLANET code, refer to Appendix B and C of the USPS PLANET - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 91
. Example: For a height-to-width ratio of 2/3, set /AspectRatio equal to 0.67. Optional The value is 1/600 inch. Required Sets the module width in /Units. Specifies the X dimension (smallest element width) Example: A value of 15 specifies an element width of 15/600 inch. Required Specifies the bar - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 92
specified as a percentage. A valid non-zero /Errorpercent value overrides /ErrorLevel. See "/Error Percent" on page 90. Optional This is not supported. Optional This is not supported. Optional The default value is false (no truncation). If the value is set to true, then the right row indicator and - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 93
/ErrorLevel 2 is selected, because it is closest to 20 x 0.35, or 7. This example prints a PDF417 bar code with the following settings: Sample01234 >barcodeshow %this is the data to be encoded - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 94
Optional Sets the size of the module element in /Units. The minimum value supported is 1. Arguments the mode, the input data sent with the Transfer Bar Code Data command must follow these rules the postal code, country code, and class of service fields must follow the label fields. Each field must - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 95
spec). Codes longer than 6 characters are truncated. Codes shorter than 6 characters are padded with spaces. • The country code and class of service must should terminate this message. An optional secondary message follows the class of service for modes 2 and 3. For modes 4, 5, and 6, the message - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 96
dec) 00 (hex) 0 (dec) 00 (hex) Description Required Identifies the bar code symbology (/MicroPDF417) Optional /Units is used for /ModuleWidth and /ModuleHeight calculations. Optional Sets the X dimension of the module (white or black rectangle) in 100th of an inch. To set the X dimension to default - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 97
key • Values for /FontName key Minimum: [0 0] (dec) Maximum: [1200 1200] (dec) [150 150] (dec) [96 96] (hex) Description Optional Defines how the HRT is printed When the value given is not within the defined range: • The value is set to default (/Courier-Bold) if the value is of the type - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 98
Units is used in the calculations. /Height (linear component) int Dependent on the Dependent on the Optional module height range of the linear component. default module example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 99
module (white or black rectangle) in one-hundreths of an inch. /EmbedText (linear component) name /NoText /Embedded /HalfEmbedded /Under Dependent on the default HRT Location of Linear Component, except for UCC-128, which uses Under as its default value. Defines if and where the HRT is printed - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 100
supplement to the instructions provided in the Forms and Bar Code Card User's Guide. Adding fonts to existing printer objects Users can add fonts to printer objects in Forms Manager without having to delete and then recreate the printer object. Loading forms to a flash drive Users can download forms - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 101
fax concurrently Users have the option to print a document that is being faxed or e-mailed. Note: This function is available only on multifunction printers that support e-mail and/or fax. New version of PDFlib In this release of the Forms and Bar Code Card, formsmerge and LDSS is updated to PDFlib - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 102
This function is available only on multifunction printers that support e-mail and/or fax. Select ports that Forms Card listens to Users can select the printer input ports that Forms Card will listen to and perform merging on. This is accomplished through the Print Port Setting menu item. • If a port - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 103
flash drive. RFID support Through LFJT (Lexmark Forms Job Ticket) support, Forms Card allows users to specify RFID printer options when printing a merged e-form. LFJT is a simple XML format for specifying those options. The LFJT is embedded into the merged PDF by the Forms Card firmware. The PDF is - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 104
data Performs the same actions as the ZPL filter, except it uses "@" as the "format instruction" prefix Forms Card font support Forms Card has three types of font support. • Supported-For supported fonts, Forms Card uses the appropriate font file. • Recognized-For recognized fonts, the Forms Card - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 105
Bubble font This font is used for standardized testing forms that are optically read for grading purposes. It is available in Forms Composer when the font "OCRB in Bubbles" is used. The following is a character map for use while designing the formset. Bubble font 102 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 106
's computer font list is richer than that of the printer, a user could easily create a form where not all characters will print. The user can stipulate a supported code page via Forms Composer. Five font families support the international character set. • Intl-Courier • Intl-CG Times • Intl-Univers - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 107
files on printer directory The Forms and Bar Code Card places forms files on the printer in the formsmerge directory. These files are visible if the user prints a directory page from the printer control panel. These files must not be tampered with in any way. Forms files on printer directory 104 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 108
on Y Forms Card NA NA Forms Card Features UTF-8, UTF-16 Y Y2 NA DBCS file names Y1 Y Y DBCS bold & italic Y Y NA 1 Supported when the printer control panel is set to a DBCS language 2 Limited UTF-8 and UTF-16 support (no Asian fonts or file names, etc.) 3 Requires an RFID-enabled - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 109
Use forms stored on a flash Y drive NA NA NA Print all forms Y NA NA Y Vertical PDF version 1.3-1.6 1.3-1.6 1.6 NA Floating subforms Y Y Y NA Error page control Printer Supported when the printer control panel is set to a DBCS language 2 Limited UTF-8 and UTF-16 support - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 110
Updated Visual Bar Code Y Designer v3.0 NA NA NA Alternate escape code (AEC) Y Human-readable text fonts • Courier Y Y Y • SM Unit Y Y Y • SM Unit Condensed Y Y Y • SM Gothic Y Y Y • Roman Y Y Y • OCR B Y Y Y • PLANET Y Y Y 1 Supported when the printer control - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 111
v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image One-dimensional bar code symbologies Codabar Y Y Y supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 112
Bar Code Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Code 3 of 9 Sample image Y Y Y Y Y Y Code 3 of 9 + supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 113
have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, and the accompanying bar code dictionaries is installed in Optra Forms. 3 These - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 114
Producer Lexmark Optra Forms Bar code name HIBC128, HIBC 39 Y3 Y Y Y Y Sample image Comments The HIBC (Health Industry Bar Code) has versions based on supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 115
Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Interleaved 2 of 5 Sample image Y Y Y Y Y Y Interleaved 2 of supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 116
Code Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Matrix 2 of 5 Sample image Y Y Y Y Y Y2 Matrix 2 of 5 + supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 117
Document Producer Lexmark Optra Forms Bar code name Two-dimensional bar code symbologies Data Matrix Y3 Y Y Y Y Sample image Comments symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, and - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 118
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name MaxiCode Sample image Y Y Y Y Y Y1 Comments MaxiCode symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, and - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 119
Lexmark Optra Forms Bar code name MicroPDF417 Y3 Y Y Y Y Sample image Comments MicroPDF417 is a multi-row symbology, derived from and closely based supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 120
.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name QR Y Y Y Y Y Sample image Comments QR Code (Quick Response Code) is a matrix code developed by Nippondenso ID Systems. Maximum symbol size is 177 modules square, capable of encoding 7366 numeric characters - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 121
Document Producer Lexmark Optra Forms Bar code name Composite bar code symbologies Composite + UPC Y3 Y Y Y Y Sample image Comments An symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, and - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 122
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Composite + EAN Y3 Y Y Y Y Sample image Comments Composite + UCC/ Y3 Y Y Y Y EAN 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 123
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Composite + RSS-14 Y3 Y Y Y Y Sample image Comments 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 124
Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name EAN/JAN-8, JIS--S-UCC Sample image Y Y Y Y Y Y EAN/JAN-8 + supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 125
Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name EAN/JAN-13, JIS-UCC Sample image Y Y Y Y Y Y EAN/JAN-13 + supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 126
Document Producer Lexmark Optra Forms Bar code name Sample image EAN 128, UCC-128, Y Y Y Y Y Y EAN/UCC-128 Comments The EAN/UCC-128 specification uses supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 127
.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name RSS (Reduced Y3 Y Y Y Y Space Symbology) Sample image Comments RSS-14 is symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, and - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 128
Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name UPC-A Sample image Y Y Y Y Y Y UPC-A + 2-digit supplemental supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 129
Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name UPC-E Sample image Y Y Y Y Y Y UPC-E + 2-digit supplemental supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 130
Producer Lexmark Optra Forms Bar code name Sample image amounts of data, allowing varying quantities of customer-specific data to be added to the basic postal supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 131
Code Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image Dutch Post 4-State Y Y Y Y Y Y2 bar code supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 132
Code Card v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image German Postal 2 of Y Y Y Y Y Y2 5 supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 133
LDSS Document Producer Lexmark Optra Forms Bar code name Sample image Singapore 4-State FIM is used by the United States Postal Service (USPS) canceling machines supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 134
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name USPS POSTNET 5-digit ZIP Code Sample image Y Y Y Y Y Y2 USPS POSTNET supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 135
Producer Lexmark Optra Forms Bar code name USPS tray label 10-digit 2 of 5 Sample image Y . The Zebra code consists of a series of diagonal or vertical marks. The supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 136
C Forms Card fonts Single-byte Forms Card fonts Font name AdobeSansMM AdobeSerifMM Albertus Extra Bold (W1) Albertus Medium (W1) Albertus MT Albertus MT Lt Albertus-ExtraBold Albertus-Medium AlbertusMT AlbertusMT-ExtraBold AlbertusMT-Italic AlbertusMT-Light AlbertusMT-Medium Antique Olive (W1) - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 137
Font name AntiqueOlive-Italic AntiqueOlive-Roman Apple Chancery Apple-Chancery Apple-ChanceryCE Architext CMC7 Arial Arial Black Arial Bold Arial Bold Italic Arial Italic Arial-Bold Arial-BoldItalic Arial-BoldItalicMT Arial-BoldMT ArialCE ArialCE-Bold ArialCE-BoldItalic ArialCE-Italic Arial-Italic - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 138
Font name AvantGarde-DemiOblique Bodoni Bodoni Poster Bodoni PosterCompressed Bodoni-Bold Bodoni-BoldItalic BodoniCE BodoniCE-Bold BodoniCE-BoldItalic BodoniCE-Italic BodoniCE-Poster BodoniCE-PosterCompressed Bodoni-Italic Bodoni-Poster Bodoni-PosterCompressed Bookman Bookman Demi Bookman Demi - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 139
Font name CenturySchlbk-BoldItalic CenturySchlbk-Italic CenturySchlbk-Roman CG Omega (W1) CG Times (W1) CG Times (W1) Bold CG Times (W1) Bold Italic CG Times (W1) Italic CG Times (WE) CG Times (WE) Bold CG Times (WE) Bold Italic CG Times (WE) Italic CG Times (WG) CG Times (WG) Bold CG Times (WG) - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 140
Font name CGOmega-Italic CG-Omega-Italic CGTimes CG-Times CGTimes-Bold CG-Times-Bold CGTimes-BoldItalic CG-Times-BoldItalic CGTimes-Italic CG-Times-Italic Chicago ChicagoCE Clarendon Clarendon Condensed (W1) Clarendon Light Clarendon-Bold ClarendonCE ClarendonCE-Bold ClarendonCE-Light Clarendon- - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 141
Font name Courier New Courier New Bold Courier New Bold Italic Courier New Italic Courier-Bold Courier-BoldItalicTT Courier-BoldOblique Courier-BoldTT CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique CourierHP CourierHP-Bold CourierHP-BoldItalic CourierHP-Italic Courier-ItalicTT - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 142
Font name Garamond-Antiqua Garamond-Halbfett Garamond-Kursiv Garamond-KursivHalbfett Geneva GenevaCE GillSans GillSans Condensed GillSans ExtraBold GillSans Light GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSansCE-Bold GillSansCE-BoldCondensed GillSansCE-BoldItalic GillSansCE- - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 143
Font name Goudy-Italic Helvetica Helvetica Bold Helvetica Bold Italic Helvetica Condensed Helvetica Italic Helvetica-Black Helvetica-Black Bold Helvetica-Black Bold Italic Helvetica-BlackOblique Helvetica-Bold Helvetica-BoldItalic Helvetica-BoldOblique HelveticaCE HelveticaCE-Black HelveticaCE- - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 144
Font name Helvetica-Light Helvetica-Light Italic Helvetica-LightOblique Helvetica-Narrow Helvetica-Narrow Bold Helvetica-Narrow Bold Italic Helvetica-Narrow Italic Helvetica-Narrow-Bold Helvetica-Narrow-BoldItalic Helvetica-Narrow-BoldOblique Helvetica-Narrow-Italic Helvetica-Narrow-Oblique - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 145
Font name Intl-Univers-BoldItalic Intl-Univers-Condensed-Bold Intl-Univers-Condensed-BoldItalic Intl-Univers-Condensed-Medium Intl-Univers-Condensed-MediumItalic Intl-Univers-Medium Intl-Univers-MediumItalic JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMTCE JoannaMTCE-Bold JoannaMTCE-BoldItalic - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 146
Font name LubalinGraphCE-DemiOblique LubalinGraph-Demi LubalinGraph-DemiOblique ManufIcons Marigold Marigold (W1) MICR Mona Lisa Recut Monaco MonacoCE MonaLisa-Recut New York NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbkCE-Bold NewCenturySchlbkCE-BoldItalic NewCenturySchlbkCE- - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 147
Font name Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Palatino-Bold Palatino-BoldItalic PalatinoCE-Bold PalatinoCE-BoldItalic PalatinoCE-Italic PalatinoCE-Roman Palatino-Italic Palatino-Roman RomanPillar RomanPillar Bold RomanPillar BoldItalic RomanPillar Italic RomanPillar5 - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 148
Font name Times New Roman Bold Times New Roman Bold Italic Times New Roman Italic Times-Bold Times-BoldItalic TimesCE-Bold TimesCE-BoldItalic TimesCE-Italic TimesCE-Roman Times-Italic TimesNewRoman TimesNewRoman-Bold TimesNewRoman-BoldItalic TimesNewRoman-BoldItalicTT TimesNewRoman-BoldTT - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 149
Font name Univers (WE) Bold Italic Univers (WE) Medium Italic Univers (WG) Univers (WG) Bold Univers (WG) Bold Italic Univers (WG) Medium Italic Univers (WL) Univers (WL) Bold Univers (WL) Bold Italic Univers (WL) Medium Italic Univers (WR) Univers (WR) Bold Univers (WR) Bold Italic Univers (WR) - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 150
Font name UniversCE-CondensedBoldOblique UniversCE-CondensedOblique UniversCE-Extended UniversCE-ExtendedObl UniversCE-Light UniversCE-LightOblique UniversCE-Medium UniversCE-Oblique Univers-Condensed Univers-CondensedBold Univers-Condensed-Bold Univers-Condensed-BoldItalic Univers- - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 151
Double-byte Forms Card fonts One DBCS Language is supported: Simplified Chinese. The column on the left indicates common font names. The column on the right indicates the actual font file resident on Forms Card. - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 152
memory to printer. Missing or corrupt file- download formsets again. Missing or corrupt file- download formsets again. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Download formset again. Add memory to printer. User or internal error Forms print errors - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 153
printer. Add memory to printer. Add memory to printer. Add memory to printer. User or internal error Download formsets. Contact Lexmark Service. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Missing or corrupt file- download formsets again. Forms print - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 154
PDF API PDFLIB failure. PJC XML parse error. Invalid FieldMap. PJC XML parse error. Invalid FieldName. Printer out of memory. Print job LFF file Solution Add memory to printer. Add memory to printer. Contact Lexmark Service. Contact Lexmark Service. Missing or corrupt file- download formsets - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 155
file missing required element: %s Error type LFM file Insufficient memory XML error XML error Solution Missing or corrupt file- download formsets again. Add memory to printer. Possible corrupt file- download formsets again. Possible corrupt file- download formsets again. Forms - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 156
Invalid Character PostScript error messages To assist with troubleshooting, the Forms and Bar Code Card generates error messages when an invalid bar code condition occurs. PostScript error reporting must be enabled on the printer for these messages to be printed out. If an error occurs during a bar - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 157
Errors common to all symbologies Error code 1 2 3 4 5 6 7 8 9 10 11 18 19 Error description Unexpected error NULL data Invalid structure No active bar codes Structure out of range Parameter buffer NULL Parameter buffer too small Parameters not saved Unknown bar code type Unknown bar code ID - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 158
String errors Invalid String Character Empty Error code 12 13 EAN/JAN 8/113 X EAN/UCC Composite X French Post X German Post X HIBC X ISBN X ISSN X ITF14 X Japan Post X MaxiCode MicroPDF417 MSI Plessey X X OMR X X PDF417 X PLANET X QR Code X RSS14 X Singapore - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 159
Errors specific to symbologies Error code 20 21 22 23 24 25 26 27 28 29 columns not in range rows not in range negative module size Invalid Where flag Invalid What flag Invalid Date/Time Invalid Format Product/Catalog number too long Unit measure digit only Invalid lot number Common error messages - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 160
Error code 52 53 54 55 56 57 58 60 61 62 63 Symbology HIBC HIBC HIBC Intelligent Mail MaxiCode MaxiCode MSI Plessey MicroPDF MicroPDF MicroPDF MicroPDF Error description Special link char missing Invalid 2-digit quantity Invalid 5-digit quantity Invalid bar code identifier Invalid encoding string - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 161
exact same way as the HP BDP. The BCE does not support lowercase "a-z" character input, and does not translate to uppercase, and is operating per the specifications in the URLs noted above. Therefore, the Forms and Bar Code Card firmware must convert any code 93 lowercase input to uppercase before - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 162
is operating per the specs noted above, and does not translate lowercase to uppercase. Therefore, the Forms and Bar Code Card firmware must convert any Codabar that leads to garbled images. The maximum amount of input data is shown in the table below. This table is just a guide, not an absolute - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 163
bar code image sizes with previous Lexmark bar code options is not assured. However, the proper order and placement of the bars and spaces is the same, and the bar code will also scan correctly. If the bar code image is too wide and does not fit within the available space, then users should either - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 164
loss of data that can be scanned. Note: Exact size compatibility of certain PDF417 bar code images with previous Lexmark bar code options is not assured. However, the by the AIM specification, but users should never exceed these values. If users were to change to other printing equipment that did - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 165
in size. • Escalate it for a field fix. PDF417 capacity The Introduction of the AIM PDF417 specification characters should be allowed and truncated by firmware before the BCE is called. The remaining specification, but users should never exceed these values. If users were to change to other printing - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 166
manual version 3.2, and the HP BarDIMM Technical Reference manual specification, which allows up to eight MaxiCode symbols to be chained together as one. However, there are no bar code readers that can decode such a combined bar code series. The SuchyMIPS BCE supports an error. Users should add - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 167
any encodable data, this will always be the case. If the 4-byte structured append is specified alone, then the Forms and Bar Code Card should print a valid MaxiCode symbol that is empty. Depending on the scanner used, it may not produce a valid scan. If an old-style 3-byte structured append is - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 168
firmware-imposed limits on certain bar codes. These limits are less than the original LXK BCC, but are needed to prevent corruption of bar code images absence of start/stop characters, if users attempt to encode a Codabar bar code does not work as on previous Lexmark Bar Code options. The barcodepath - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 169
the job will be flushed. The printer will then return to Ready state. • If the Print PS Error setting of the printer is turned off, then the job will be flushed and the printer will return to Ready state. French Postal 3 of 9 dimensions This bar code is based on a Code 3 of 9 with a checksum digit - Lexmark C925 | Forms and Bar Code Card Technical Reference Guide - Page 170
www.lexmark.com
www.lexmark.com
May
2011
Forms and Bar Code Card
3.2
Technical Reference Manual