Lexmark C935 User's Guide - Page 143
Restoring the factory default settings, Encrypting the printer hard disk, Restoring Factory Defaults
View all Lexmark C935 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
5 Press repeatedly until Power Saver appears, and then press . 6 Press repeatedly to decrease or repeatedly to increase the number of minutes before the printer enters Power Saver mode, and then press . Available settings range from 2-240 minutes. Note: Power Saver settings can also be adjusted by issuing a Printer Job Language (PJL) command. For more information, see the Technical Reference available on the Lexmark Web site at www.lexmark.com/publications. Restoring the factory default settings 1 From the control panel, press . 2 Press until Settings appears, and then press . 3 Press until Setup appears, and then press . 4 Press until Factory Defaults appears, and then press . 5 Press until Restore Now appears, and then press . Restoring Factory Defaults appears. Warning: Restore Now returns all printer settings to the factory default settings except Network/Port menu settings. All downloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk are not affected. Encrypting the printer hard disk This functionality is available only when a printer hard disk is installed and working properly. Warning: All files and resources on the printer hard disk will be deleted. Resources residing in the printer flash memory or RAM will not be affected. 1 Turn the printer off. 2 From the control panel, press and hold and while turning the printer on. 3 Release both buttons when Performing Self Test appears. The printer performs its power-on sequence, and then CONFIG MENU appears. 4 Press repeatedly until Disk Encryption appears, and then press . 5 Press repeatedly until appears next to Enable or Disable, and then press . Note: Select Enable to enable hard disk encryption or Disable to disable hard disk encryption. Contents will be lost. Continue? appears. 6 Press repeatedly until Yes appears, and then press . A progress bar appears. 7 Press repeatedly until Exit Config Menu appears, and then press . The printer performs its power-on sequence, and then Ready appears. 143