Lexmark CX417 User Guide - Page 252
Memory full [38], Memory full, cannot print faxes, Network [x] software error [54]
View all Lexmark CX417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
Troubleshooting 252 Memory full [38] Try one or more of the following: • From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer models, press to confirm. • Install additional printer memory. Memory full, cannot print faxes From the control panel, do either of the following: • Touch Continue holding faxes without printing to clear the message. • Touch Attempt to print to restart the printer and continue printing. Network [x] software error [54] Try one or more of the following: • From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer models, press to confirm. • Turn off the printer, wait for about 10 seconds, and then turn the printer back on. • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com. Non-Lexmark [supply type], see User's Guide [33.xy] Note: The supply type can be a toner cartridge or the imaging kit. The printer has detected a non‑Lexmark supply or part installed in the printer. Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of thirdparty supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. For more information, see "Using genuine Lexmark parts and supplies" on page 207. All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components. Warning-Potential Damage: Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts may not be covered by the warranty. To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your printer, press and hold and the # button on the control panel simultaneously for 15 seconds. If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part. Note: For the list of supported supplies, see the "Ordering supplies" section or go to www.lexmark.com.