Lexmark CX421 Paper and Specialty Media Guide PDF - Page 116
Glossary, Corner buckler
View all Lexmark CX421 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Glossary Glossary Adhesive contamination Anvil cuts Back splits Basis weight Beam strength Butt cut Calendering Conversion Converters Corner buckler Curl Cut sheet Debossing Delamination Die‑cut Driver edge Embossing Feed 116 Migration of adhesive away from a label, which can cause printer contamination. Also known as glue contamination. Cuts that penetrate both the face stock and the liner of a label. Also known as back slits or liner cuts. Cuts through the backside of the liner. Back slits increase the potential for adhesive contamination. Weight in pounds of a specific number of sheets of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support itself and remain flat and straight during the printing process. Cut flush to one another, with no extra area between. This cut does not extend through the liner. Butt cut labels may or may not have an edge matrix removed. The process of moving paper through metal rolls during manufacturing to smooth and gloss the surface of the paper. The process that turns base stock into cut‑sheet products designed for specific applications. Conversion includes cutting the base stock to size, perforating the stock, die‑cutting, and applying inks and topcoats. Print material suppliers who take the base stock from the manufacturer and convert it into cut sheet products. The metal tab at the corner of a paper tray that helps the printer separate one sheet of paper from the stack during the pick process. Waviness or curvature at the edge of the material that is generally moisture related. Single piece (page) of paper or label stock. Process of pressing an image down into the surface of the label or card stock. See also "Embossing" on page 116. The peeling of labels off the backing during the printing process. Labels: Cut of material (face stock) to form individual labels on sheet. Cuts do not penetrate the liner. Card Stock: Cuts made with dies to create the shapes wanted in the stock. Cuts may or may not go completely through the stock. See also "Ties" on page 118. For printers that use a fixed reference for feeding paper through the paper path (as opposed to printers that center paper in the path), the edge of the print material that is positioned next to the hardware reference and that is driven by the rollers in the printer. For most Lexmark printers, the driver edge is the left edge of a portrait page. Process of raising the surface of the base material by stamping an image or design with an embossing machine. The machine has a roll with a raised image on the surface. As the print material passes through the machine, the image is pressed into the material. See also "Debossing" on page 116. How well the stock moves out of the paper tray and through the printer.