Lexmark CX727 Forms and Bar Code Card P4.2 Users Guide - Page 21
Cannot see complete list of supported forms
View all Lexmark CX727 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Troubleshooting 21 Cannot see complete list of supported forms Use Forms Manager to view all forms stored on the optional flash memory card or the printer hard disk Data filters are not working Check the Data Filters menu to see if the filter that you want is enabled Cannot add new forms Try one or more of the following: Delete unused forms Defragment the flash memory The flash memory may be full. You can access this feature from the Printer Properties in Forms Manager. Bar codes do not print as expected Try one or more of the following: Make sure that the option card is compatible with the printer Make sure that the option card is installed 1 Print a menu settings page. 2 In the Printer Information section, check that the Forms and Bar Code Card option is listed. Note: For more information on printing a menu settings page, see the printer User's Guide. When using a PCL 5 emulation print driver, make sure that the escape sequence used to generate the bar code is constructed properly The escape sequence must begin with Esc and contain the #T parameter (not case sensitive) for the bar code to be generated. Default values are used for parameters not explicitly defined in the sequence.